Hardware Reference
In-Depth Information
g. Delete everything from the card with the command
rm -rf /media/
UNTITLED
, replacing
/media/UNTITLED
with the mount point of your
device. Be absolutely sure that this is the correct mount point and
that you're comfortable with wiping all data from this card.
h. Change to extracted file directory with
cd LINUX_IMAGE_FOR_SD_In
tel_Galileo_v0.7.5
i. Copy all the files in the directory using the command
cp -r * /media/
UNTITLED
.
5. Eject or unmount the card from your computer and remove it.
6. With Galileo powered down, insert the card into the microSD slot.
7. Power on the board and it should boot off the card. The first time you
boot, it may take some extra time until it's ready to be used.
It's not always immediately apparent that you've done it cor-
rectly, but if you watch the LED labeled “SD” next to the Mi-
croSD card slot, it should blink and flicker quite a bit when you
boot up your board.
