Graphics Reference
In-Depth Information
Figure 4.13 Set the filament diameter size used by your 3D printer.
The Simple has no fan, so you should uncheck the Enable Cooling box, as shown
in Figure 4.14 . Make no other changes and then click the Printer Settings tab to
the right of the Filament Settings tab.
Figure 4.14 The Simple has no fan, so configure Repetier accordingly.
On the Printer Settings tab, select the General option on the left side of the screen
and set the Bed Size X and Y values each to 100 (mm). Set the Print Center X and
Y values each to 50 (mm), as shown in Figure 4.15 . Make no other changes and
then click the Extruder 1 option.
 
 
Search WWH ::




Custom Search