References - Piling Engineering - page 380

De Nicola, A. and M.F. Randolph (1997) The plugging behaviour of driven and jacked piles in
sand, Géotechnique , 47(4): 841-856.
Deeks, A.J. andM.F. Randolph (1995) A simple model for inelastic footing response to transient
loading, Int. J. Num. and Anal. Meth. in Geom ., 19(5): 307-329.
Dolwin, J.D. and T. Poskitt (1982) An optimisation method for pile driving analysis, Proc. 2nd
Int. Conf. on Num. Methods in Offshore Piling , Austin, 91-106.
Dumbleton, M.J. and G. West (1976) Preliminary sources of information for site investigation
in Britain. Department of the Environment, Transport and Road Research Laboratory Report
LR403, revised edition.
Dunnavant, T.W. and M.W. O'Neill (1989) Experimental p-y model for submerged, stiff clay,
ASCE Journal of Geotechnical Engineering , 115(1): 95-114.
Elson, W.K. (1984) Design of laterally loaded piles. CIRIA Report 103, London.
Evangelista, A. and C. Viggiani (1976) Accuracy of numerical solutions for laterally loaded
piles in elastic half-space, Proc. 2nd Int. Conf. on Numerical Methods in Geomechanics ,
Blacksburg, Vol. 3: 1367-1370.
Fahey, M. (1998) Deformation and in situ stress measurement, Proc. 1st Int. Conf. On Site
Characterisation - ISC 98 , Atlanta, Vol. 1: 49-68.
Fahey, M. and M.F. Randolph (1984) Effects of disturbance on parameters derived from self-
boring pressuremeter tests in sand, Géotechnique , 34(1): 81-97.
Fellenius, B.H. (1972) Down drag on piles in clay due to negative skin friction, Can. Geotech. J .,
9(4): 323-337.
Fellenius, B.H. (1980) The analysis of results from routine pile load tests, Ground Engineering ,
6(Sept): 19-31.
Fellenius, B.H. (1988) Variation of CAPWAP results as a function of the operator, Proc. 3rd
Int. Conf. on Application of Stress-wave Theory to Piles , Ottawa, pp. 814-825.
Fernie, R. and T. Suckling (1996) Simplified approach for estimating lateral wall movement
of embedded walls in UK ground, in Mair and Taylor (eds), Geotechnical Aspects of
Underground Construction in Soft Ground , Rotterdam, Balkema.
Fleming, W.G.K. (1984) Discussion on State of the Art paper, Advances in Piling and Ground
Treatment for Foundations Conference , London: ICE.
Fleming, W.G.K. (1992) A new method for single pile settlement for prediction and analysis,
Géotechnique , 42(3): 411-425.
Fleming, W.G.K. (1995) The understanding of continuous flight auger piling, its monitor-
ing and control, Proceedings, Institution of Civil Engineers Geotechnical Engineering ,
Vol. 113, July: 157-165. Discussion by R. Smyth-Osbourne and reply, Vol. 119, Oct.,
1996: 237.
Fleming, W.G.K. and P.F. Lane (1971) Tolerance requirements and construction problems in
piling, Conf. on Behaviour of Piles , London: ICE, pp. 175-178.
Fleming, W.G.K. and S. Thorburn (1983) Recent piling advances, State of the Art Report, Proc.
Conf. on Advances in Piling and Ground Treatment for Foundations , London: ICE.
Fleming, W.K. and Z.J. Sliwinski (1977) The use and influence of bentonite in bored pile
construction. D.O.E/CIRIA Piling Development Group Report PG 3.
Fookes, P.G. and L. Collis (1975) Cracking and the Middle East, Concrete, 1176 ,
10(February): 14-19.
Foray, P., J.L. Colliat and J.F. Nauroy (1993) Bearing capacity of driven model piles in dense
sands from calibration tests, Proc. 25th Annual Offshore Technology Conference , Houston,
Paper OTC 7194, pp. 655-665.
Francescon, M. (1983) Model Pile Tests in Clay: Stresses and Displacements Due to Installation
and Axial Loading . Ph.D. Thesis, University of Cambridge.
Francis, A.J., L.K. Stevens and P.J. Hoadley (1965) Paper to Symposium of Soft Ground
Engineering . Brisbane: Institution of Engineers Australia.