Biomedical Engineering Reference
In-Depth Information
Joyce, L. D., Noon, G. P., Joyce, D. L. & Debakey, M. E. (2004) Mechanical circulatory
support ± a historical review. ASAIO Journal, 50, x±xii.
Kantrowitz, A., Tjonneland, S., Freed, P. S., Phillips, S. J., Butner, A. N. & Sherman, J.
L., Jr. (1968) Initial clinical experience with intraaortic balloon pumping in
cardiogenic shock. Journal of the American Medical Association, 203, 113±118.
Kasemo, B. (1983) Biocompatibility of titanium implants: surface aspects. Journal of
Prosthetic Dentistry, 49, 835±837.
Kihara, S., Yamazaki, K., Litwak, K. N., Litwak, P., Kameneva, M. V., Ushiyama, H.,
Tokuno, T., Borzelleca, D. C., Umezu, M., Tomioka, J., Tagusari, O., Akimoto, T.,
Koyanagi, H., Kurosawa, H., Kormos, R. L. & Griffith, B. P. (2003) In vivo
evaluation of a MPC polymer coated continuous flow left ventricular assist system.
Artificial Organs, 27, 188±192.
Klee, D. & HÈker, H. (1999) Polymers for biomedical applications: improvement of the
interface compatibility. Advances in Polymer Science ± Biomedical Applications/
Polymer Blends. Berlin, Springer.
Klinger, A., Steinberg, D., Kohavi, D. & Sela, M. N. (1997) Mechanism of adsorption of
human albumin to titanium in vitro. Journal of Biomedical Materials Research, 36,
387±392.
Koster, A., Loebe, M., Sodian, R., Potapov, E. V., Hansen, R., Muller, J., Mertzlufft, F.,
Crystal, G. J., Kuppe, H. & Hetzer, R. (2001) Heparin antibodies and
thromboembolism in heparin-coated and noncoated ventricular assist devices.
Journal of Thoracic Cardiovascular Surgery, 121, 331±335.
Krishnan, L. K., Varghese, N., Muraleedharan, C. V., Bhuvaneshwar, G. S., DerangÁre,
F., Sampeur, Y. & Suryanarayanan, R. (2002) Quantitation of platelet adhesion to
Ti and DLC-coated Ti
in vitro using 125I-labeled platelets. Biomolecular
Engineering, 19, 251±253.
Kumta, P. N. (2006) Ceramic biomaterials. In Guelcher, S. A. & Hollinger, J. O. (Eds) An
Introduction to Biomaterials. Boca Raton, FL, Taylor & Francis Group.
Lamba, N. M. K., Woodhouse, K. A. & Cooper, S. L. (1998) Polyurethanes in
Biomedical Applications. New York, CRC Press.
Leduc, P. & Wang, U. (2006) Protein adsorption at the biomaterial/tissue interface. In
Guelcher, S. A. & Hollinger, J. O. (Eds) An Introduction to Biomaterials. Boca
Raton, FL, Taylor & Francis Group.
Levi, D. S., Kusnezov, N. & Carman, G. P. (2008) Smart materials applications for
pediatric cardiovascular devices. Pediatric Research, 63, 552±558.
Liotta, D., Hall, C. W., Villanueva, A., O'Neal, R. M. & Debakey, M. E. (1996) A
permanent autologous lining for implantable blood pumps: a pseudoendocardium.
Cardiovascular Research Center Bulletin, 4, 69±80.
Liu, X., Chu, P. K. & Ding, C. (2004) Surface modification of titanium, titanium alloys,
and related materials for biomedical applications. Materials Science and
Engineering: R: Reports, 47, 49±121.
Long, J. W. (2001) Advanced mechanical circulatory support with the Heartmate left
ventricular assist device in the year 2000. Annals of Thoracic Surgeons, 71, 176±
182.
McGee, M. G., Szycher, M., Turner, S. A., Clay, W., Trono, J. M., Fuqua, J. & Norman,
J. C. (1980) Use of a composite biomer-butyl rubber/biomer material to prevent
transdiaphragmatic water permeation during long-term, electrically-actuated left
ventricular assist device (LVAD) pumping. Cardiovascular Diseases, 7, 278±287.
Moen, O., Fosse, E., Dregelid, E., Brockmeier, V., Andersson, C., Hogasen, K., Venge,
P., Mollnes, T. E. & Kierulf, P. (1996) Centrifugal pump and heparin coating
