Biomedical Engineering Reference
In-Depth Information
experience shows that each new material technology should be approached with
caution, and adopted only after carefully controlled clinical series can validate the
basic engineering and material science principles associated with its manufacture.
7.7 References
Affolter C, Weisse B, Stutz A, KÈbel S, and Terrasi GP (2009), `Optimization of the
stress distribution in ceramic femoral heads by means of finite element analysis',
Proc Inst Mech Eng H, 223, 237±48.
Bal BS, Rahaman MN, Aleto T, Miller FS, Traina F, and Toni A (2007), `The
significance of metal staining on alumina femoral heads in total hip arthroplasty', J
Arthroplasty, 22, 14±19.
Bal BS, Khandkar A, Lakshminarayanan R, Clarke IC, Hoffman AA, and Rahaman MN
(2008), `Testing of silicon nitride bearings for total hip arthroplasty', J Biomed
Mater Res Part B, 87B, 447±54.
Bal BS, Khandkar A, Lakshminarayanan R, Clarke IC, Hoffman AA, and Rahaman MN
(2009a), `In vitro performance of silicon nitride ceramic in total hip bearings', J
Arthroplasty, 24, 110±16.
Bal BS, Rahaman MN, Fu Q, Khanna S, Tinunagari P, and Ellingsen MD (2009b),
`Nanoceramics and ceramic nanocomposites in prosthetic hip and knee joints', in
Handbook of Nanoceramics and Their Based Nanodevices, Volume 5, Chapter 8,
edited by Tseng T-Y and Nalwa HS, American Scientific Publishers, Valencia, CA,
pp. 187±202.
Barrack RL, Burak C, and Skinner HB (2004), `Concerns about ceramics in THA', Clin
Orthop Rel Res, 429, 73±9.
Bergmann G, Graichen F, and Rohlmann A (1993), `Hip joint loading during walking and
running, measured in two patients', J Biomech, 26, 969±90.
Bierbaum BE, Nairus J, Kuesis D, Morrison JC, and Ward D (2002), `Ceramic-on-
ceramic bearings in total hip arthroplasty', Clin Orthop Rel Res, 405, 158±63.
Bizot P, Hannouche D, Nizard R, Witvoet J, and Sedel L (2004). `Hybrid alumina total
hip arthroplasty using a press-fit metal-backed socket in patients younger than 55
years. A six- to 11-year evaluation', J Bone Joint Surg Br, 86, 190±4.
Boutin P (1971), `Alumina and its use in surgery of the hip', Presse Med, 79, 639±40.
Capello WN, D'Antonio JA, Feinberg JR, Manley MT, and Naughton M (2008),
`Ceramic-on-ceramic total hip arthroplasty: update', J Arthroplasty, 23, 39±43.
Charnley J (1961), `Arthroplasty of the hip: a new operation', Lancet, 1, 1129±32.
Chevalier J, Olagnon C, and Fantozzi G (1999), `Subcritical crack growth in 3Y-TZP
ceramics: static and cyclic fatigue', J Am Ceram Soc, 82, 3129±38.
Christel PS (1989),
`Zirconia:
the second generation of ceramics for
total hip
replacement', Bull Hosp Joint Dis Orthop Inst, 49, 170±7.
Clarke IC, Good V, Williams P, Schroeder D, Anissian L, Stark A, Oonishi H, Schuldies
J, and Gustafson G (2000), `Ultra-low wear rates for rigid-on-rigid bearings in total
hip replacements', Proc Inst Mech Eng H, 214, 331±47.
Crowninshield R, Rosenberg A, and Sporer S (2006), `Changing demographics of
patients with total joint replacement', Clin Orthop Rel Res, 443, 266±72.
D'Antonio J, Capello W, Manley M, and Bierbaum B (2002), `New experience with
alumina-on-alumina ceramic bearings for total hip arthroplasty', J Arthroplasty, 17,
390±7.
