Graphics Reference
In-Depth Information
°
After you make your selection, the following dialog box will appear:
°
Under Length , set the desired Type . You will have fi ve choices:
Architectural (example: 1'-5 3/16")
Decimal (example: 20.4708)
Engineering (example: 1'-4.9877")
Fractional (example: 17 1/16)
• Scientifi c (example: 1.6531E+01)
Under Angle , set the desired Type . You will have fi ve choices:
°
Decimal Degrees (example: 45.5)
Deg/Min/Sec (example: 45d30'30")
Grads (example: 50.6g)
Radians (example: 0.8r)
• Surveyor's Units (example: N 45d30'30" E)
For the desired Length and Angle , select the Precision , for example:
°
Architectural precision can be 0'
0 1/16", 0'
0 1/32", etc.
Decimal precision can be 0.00, 0.000, etc.
• Deg/Min/Sec precision can be 0d00'00", 0d00'00.0", etc.
By default, AutoCAD deals with the positive angles counterclockwise. If you
prefer it the other way around, check the clockwise box.
°
Search WWH ::




Custom Search