Graphics Reference
In-Depth Information
5.
Select the dimension with value
=
1.00 (the left-most spot). Five grips will
appear.
6.
Make sure that Middle in OSNAP is turned on. Select the upper right-hand
grip to make it hot and move it to the middle point of the right horizontal line.
7.
The value of the dimension should read 1.80. Press [Esc] twice.
8.
Select the same dimension block again and move the dimension line closer
to the shape. Press [Esc] twice.
9.
Select the lower dimension with value
=
6.00.
10.
Right-click and change the Precision of the number to 0.0000 and make it
Above dim line .
5.00 and show the Properties palette.
12. Change Arrow 1 and Arrow 2 to be Oblique , and the arrow size
11.
Select the dimension with value
=
=
0.3.
13.
The shape should look like the following:
14. Save the fi le and close it.
9.27 AN INTRODUCTION TO THE MULTILEADER
°
A leader in AutoCAD is an arrow pointing to a part of the drawing, with two
lines and some text to explain certain facts about that part.
A multileader can be one arrow with a single set of lines or multiple arrows
with multiple sets of lines. See the following illustration of a single leader:
°
 
Search WWH ::




Custom Search