Graphics Reference
In-Depth Information
9.24 THE QUICK DIMENSION COMMAND
°
The Quick Dimension command is used to place a group of dimensions
in a single step.
To start the Quick Dimension command, make sure you are in the
Annotate tab on the Ribbon , and, using the Dimensions panel, click the
Quick Dimension button.
The following prompt will appear:
°
°
Select geometry to dimension: (Either by clicking, Window,
or Crossing, after you are done press [Enter])
Specify dimension line position, or
[Continuous/Staggered/Baseline/Ordinate/Radius/
Diameter/datumPoint/Edit/seTtings] <Continuous>:
°
At this prompt you can right-click and the following shortcut menu will
appear:
°
From this shortcut menu, you can select the proper dimension type. You
can choose from: Continuous , Staggered , Baseline , Ordinate , Radius ,
or Diameter .
Select the type and then specify the dimension line location; a group of
dimensions will be placed in a single step.
°
 
Search WWH ::




Custom Search