Graphics Reference
In-Depth Information
EDIT HATCHING (IMPERIAL)
Workshop 11-B
1. Start AutoCAD 2010.
2. Open the fi le
Workshop_11.dwg
.
3. Select the
AR-CONC
hatch, right-click, and then select
Hatch Edit
. The
Hatch Edit
dialog box will appear. Set the
Scale
2.5.
4. Click
Preview
and press [Enter] to accept the changes you made.
5. Double-click the
ANGLE
hatch and set the
Angle
=
45.
6. Click
Preview
and press [Enter] to accept the changes you made.
7. Save the fi le and close it.
=
CHAPTER REVIEW
1. The origin of a hatch area is defi ned by AutoCAD and you cannot change it.
a. True
b. False
2. You can create a boundary for an existing hatch using the_______________
____ button.
3. AutoCAD now supports 24-bit
True Color
.
a. True
b. False
4. Which of these statements is NOT true about hatching in AutoCAD?
a. You can set the
Draw
order of the hatch.
b. You can use the conventional method and the drag-and-drop method.
c. The desired area must be closed in order to hatch it.
d. You can use hatch or gradient colors.
5. Which of the following tasks cannot be done using the
Hatch
command?
a. Separate hatches using the same command.
b. Hatching areas with gap.
c. Set the scale of the hatch pattern.
d. Hatch with a three-color gradient.
6. If you want the hatch to react to any change in the boundary, click the
_____________________ checkbox in the
Hatch
dialog box.