Graphics Reference
In-Depth Information
°
You can use
OSNAP
with
Grips
with no limitations. Also, you can use
Polar
Tracking
and
OTRACK
, so the modifi cation will be accurate.
Mirror
is the only command that does not explicitly ask for a base point.
Why is it listed with the other four commands? The answer is that AutoCAD
considers the fi rst point of the mirror line to be the base point.
In order to keep both the original and the mirrored image using
Grips
, you
have to select the
Copy
mode after you select the
Mirror
command.
You can deselect certain objects from the grips by holding the [Shift] key
and clicking on the object, avoiding the blue squares.
°
°
°
Dynamic Input
Dynamic Input
can give you information about the objects with their grips
appearing on the screen.
If you hover over an end grip of a line,
Dynamic Input
tells you the length
and the angle of that line.
°
°
°
If you hover over an end grip shared between two lines,
Dynamic Input
tells you the length and angle of both lines:
If you hover over the middle grip of an arc,
Dynamic Input
tells you the
radius and the included angle of the arc:
°