Graphics Reference
In-Depth Information
°
The best way to do this exercise is to use either
Polar Tracking
or type the
angles. You may need to move some things around to make the room look
perfect.
5.6 THE SCALE COMMAND
°
The
Scale
Command is used to enlarge or shrink objects using a scale
factor.
Make sure you are in the
Home
tab on the
Ribbon
, and, using the
Modify
panel, select the
Scale
button.
°
°
°
The
Scale
command is a three-step command.
The fi rst step is to:
Select objects:
°
°
Once you are done, press [Enter] or right-click.
The next prompt will ask you to:
Specify base point:
(Specify the base point)
°
The third prompt will be to:
Specify scale factor or [Copy/Reference] <1.0000>:
(specify the scale factor, the number should be a non-zero
positive number)
°
You can use the
Copy
option if you want to scale a copy of the objects
selected while keeping the original intact.
The command will end automatically.
See the following example:
°
°
