Graphics Reference
In-Depth Information
CHAPTER REVIEW
1. You can use more than one offset distance within the same
Offset
command.
a. True, two offset distances can be used.
b. True, you can use as many as you wish.
c. False, only one offset distance can be used.
d. The only method available in the
Offset
command is the through point
method.
2. In the
Lengthen
command, using the
Percent
option, 150% should be
input as ______________.
3. While you are trimming, you can extend, and vice versa.
a. True
b. False
4. You can fi llet using an arc, but you need to specify:
a. Distances
b. Radius
c. Radius and distances
d. Length and angle
5. There are two methods to chamfer: Distances, and Length and Angle.
a. True
b. False
6. The fi rst step in the
Extend
command is to select __________________, and
the second step is to select_______________________________________.
7.
If you want to join lines, they should be _____________, and _________ are
allowed.
CHAPTER REVIEW ANSWERS
1. c
2. 150
3. a
4. b
5. a
6. Boundary Edge(s), Objects to extend
7. collinear, gaps
