Graphics Reference
In-Depth Information
4. Using the
Offset
command, offset the polyline to the inside with an offset
distance = 1'.
5. Explode the inner polyline.
6. Using the
Offset
,
Fillet
,
Chamfer
,
Trim
,
Extend
,
Lengthen
, and
Zoom
commands, create the interior walls using the following dimensions:
°
The thickness of all inner walls = 4".
7.
Make the door openings, taking the following into consideration:
a. All door openings = 3'.
b. Always take 4" clear distance from the walls for the door openings
(except for the outside door take 1'6").