Graphics Reference
In-Depth Information
DRAWING THE PLAN (METRIC)
Workshop
2-A
1. Start AutoCAD 2010 and open the fi le
Workshop_02.dwg
.
2. Make the layer
Walls
current.
3. Using the
Pline
command, draw the outer lines first (without the
dimension) starting from point 8000,3000 using all the methods you
learned in Chapter 2.
4. Using the
Offset
command, offset the polyline to the inside with an offset
distance = 300.
5. Explode the inner polyline.
6. Using the
Offset
,
Fillet
,
Chamfer
,
Trim
,
Extend
,
Lengthen
, and
Zoom
commands, create the interior walls using the following dimensions:
