Biomedical Engineering Reference
In-Depth Information
[6] D. Hendel, A. Garti, M. Weisbort, Fracture of
the central polyethylene tibial spine in posterior
stabilized total knee arthroplasty, J. Arthro-
plasty 18 (2003) 672
e
674.
[7] M. Mariconda, G. Lotti, C. Milano, Fracture of
posterior-stabilized tibial
[20] ASTM, F 2026-10: Standard specification for
polyetheretherketone (PEEK) polymers for
surgical implant applications, American
Society for Testing and Materials, West Con-
shohocken, PA, 2010.
[21] ASTM, E 647
e
08: Standard test method for
measurement of fatigue crack growth rates,
American Society for Testing and Materials,
West Conshohocken, PA, 2008.
[22] R. Goolsby, A. Chatterjee, Notch sensitivity
and fractography of polyolefins, Polym. Eng.
Sci. 23 (1983) 117
e
124.
[23] H. Neuber, Theory of notch stresses: principles
for exact calculation of strength with reference
to structural form and material, United States
Atomic Energy Commission, Office of Tech-
nical Information, Washington, DC, 1961.
[24] G. Pluvinage,M. Gjonaj, NotchEffects in Fatigue
and Fracture. NATO science series, Kluwer
Academic Publishers, Boston (MA), 2001.
[25] G. Pluvinage, Fracture and Fatigue Emanating
from Stress Concentrations, Kluwer Academic
Publishers, Boston (MA), 2003.
[26] Victrex, Materials Properties Guide, Victrex,
West Conshohocken, PA, 2010.
[27] D.J. Kemmish, J.N. Hay, The effect of physical
ageing on the properties of amorphous PEEK,
Polymer 26 (1985) 905
e
912.
[28] R.A. Chivers, D.R. Moore, The effect of
molecular weight and crystallinity on the
mechanical properties of injection moulded
poly(aryl-ether-ether-ketone) resin, Polymer 35
(1994) 110
e
116.
[29] J.N. Chu, J.M. Schultz, The influence of
microstructure on the failure behaviour of
PEEK, J. Mater. Sci. 25 (1990) 3746
e
3752.
[30] J. Karger-Kocsis, K. Friedrich, Temperature
and strain-rate effects on the fracture toughness
of poly(ether ether ketone) and its short glass-
fibre reinforced composite, Polymer 27 (1986)
1753
e
1760.
[31] P. Rae, E. Brown, E. Orler, The mechanical
properties of poly(ether-ether-ketone) (PEEK)
with emphasis on the large compressive strain
response, Polymer 48 (2007) 598
e
615.
[32] M.F. Talbott, G.S. Springer, L.A. Berglund,
The effects of crystallinity on the mechanical
properties of PEEK polymer and graphite fiber
reinforced PEEK, J. Compos. Mater. 21 (1987)
1056
e
1081.
insert
in a genesis
knee prosthesis,
J. Arthroplasty 15 (2000)
529
e
530.
[8] D. Mauerhan, Fracture of the polyethylene
tibial post in a posterior cruciate-substituting
total knee arthroplasty mimicking patellar
clunk syndrome, J. Arthroplasty 18 (2003)
942
e
945.
[9] P. Mestha, Y. Shenava, J. D'Arcy, Fracture of
the polyethylene tibial post in posterior stabi-
lized (Insall Burstein II) total knee arthroplasty,
J. Arthroplasty 15 (6) (2000) 814
e
818.
[10] S. Kurtz, A. van Ooij, E. Ross, J. de Waal
Malefij, J. Peloza, L. Ciccarell, et al., Poly-
ethylene wear and rim fracture in total disc
arthroplasty, Spine J. 7 (2006) 12
e
21.
[11] S. Kurtz, J. Devine, PEEK biomaterials in
trauma,
orthopedic,
and
spinal
implants,
Biomaterials 28 (2007) 4845
e
4869.
[12] T. Anderson, Fracture Mechanics: Fundamen-
tals and Applications, 3rd ed. CRC Press, Boca
Raton (FL), 2005.
[13] E.H. Andrews, Fracture in Polymers, Oliver &
Boyd, London, 1968.
[14] J. Collins, Failure of Materials in Mechanical
Design, 2nd ed. John Wiley & Sons, New York,
1993.
[15] N.E. Dowling, Mechanical Behavior of Mate-
rials: Engineering Methods for Deformation,
Fracture, and Fatigue, 2nd ed. Prentice Hall,
Upper Saddle River (NJ), 1999.
[16] R. Hertzberg, Deformation and Fracture
Mechanics of Engineering Materials, 4th ed.
John Wiley & Sons, New York, 1996.
[17] A.J. Kinloch, R.J. Young, Fracture Behaviour
of Polymers, Applied Science Publishers,
London, 1983.
[18] M. Meyers, K. Chawla, Mechanical Behavior
of Materials, Cambridge University Press,
Cambridge, GBR, 2008.
[19] ASTM, D 5045-99: Standard test methods for
plane-strain fracture toughness and strain
energy release rate of plastic materials,
American Society for Testing and Materials,
West Conshohocken, PA, 2007.
