Biomedical Engineering Reference
In-Depth Information
[2] A. Schelling, H.H. Kausch, A.C. Roulin, Fric-
tion behaviour of polyetheretherketone under
dry reciprocating movement, Wear 151 (1991)
129
e
142.
[3] T.C. Ovaert, H.S. Cheng, Counterface topo-
graphical effects on the wear of poly-
etheretherketone and a polyetheretherketone
e
carbon fiber composite, Wear 150 (1991)
275
e
287.
[4] K. Friedrich, J. Karger-Kocsis, Z. Lu, Effects of
steel counterface roughness and temperature on
the friction and wear of PE(E)K composites
under dry sliding conditions, Wear 148 (1991)
235
e
247.
[5] T.A. Stolarski, Tribology of polyether-
etherketone, Wear 158 (1992) 71
e
78.
[6] Z. Lu, K. Friedrich, On sliding friction and wear
of PEEK and its composites, Wear 181
e
183
(1995) 624
e
631.
[7] Q.Z. Ming, P.L. Zai, K. Friedrich, On the wear
debris of polyetheretherketone: fractal dimen-
sions in relation to wear mechanisms, Tribol.
Int. 30 (2) (1997) 87
e
102.
[8] J. Fl¨ck, K. Friedrich, Q. Yuan, On the friction
and wear behavior of PAN- and pitch-carbon
fiber reinforced PEEK composites, Wear
225
e
229 (1999) 304
e
311.
[9] J.P. Davim, R. Cardoso, A note on the effect of
temperature on the friction and wear behaviour
of carbon-fibre-reinforced polyetheretherketone
(PEEK-CF30) at dry sliding, Int. J. Microstruct.
Mater. Properties 1 (2005) 3
e
10.
[10] A. Wang, R. Lin, C. Stark, J.H. Dumbleton,
Suitability and limitations of carbon fiber
reinforced PEEK composites as bearing
surfaces for total joint replacements, Wear
225
e
229 (1999) 724
e
727.
[11] V.K. Polineni, A. Wang, A. Essner, R. Lin,
A. Chopra, C. Stark, et al., Characterization of
carbon fiber-reinforced PEEK composite for
use as a bearing material in total hip replace-
ments, ASTM, West Conshohocken, 1998.
[12] G.I. Howling, H. Sakoda, A. Antonarulrajah,
H. Marrs, T.D. Stewart, S. Appleyard, et al.,
Biological response to wear debris generated in
carbon based composites as potential bearing
surfaces for artificial hip joints, J. Biomed.
Mater. Res. 67 (2) (2003) 758
e
764.
[13] J.P. Davim, N. Marques, A.M. Baptista, Effect
of carbon fibre reinforcement in the frictional
behaviour of PEEK in a water lubricated
environment, Wear 251 (2001) 1100
e
1104.
[14] J.P. Davim, N. Marques, Evaluation of tribo-
logical behaviour of polymeric materials for
hip prostheses application, Tribol. Lett. 11 (2)
(2001) 91
e
94.
[15] S.C. Scholes, A. Unsworth, The wear properties
of CFR-PEEK-OPTIMA articulating against
ceramic assessed on a multidirectional pin-on-
plate machine, Proc.
IME 221 (3)
(2007)
281
e
289.
[16] S.C. Scholes, A. Unsworth, Wear studies on the
likely performance of CFR-PEEK/CoCrMo for
use as artificial joint bearing materials, J. Mater.
Sci. Mater. Med. 20 (1) (2009) 163
e
170.
[17] S.C. Scholes, A. Unsworth, Pitch-based
carbon-fibre-reinforced poly (ether-ether-
ketone) OPTIMA assessed as a bearing mate-
rial in a mobile bearing unicondylar knee joint,
Proc. IME H J. Eng. Med. 223 (1) (2009)
13
e
25.
[18] S.C. Scholes, I.A. Inman, A. Unsworth,
E. Jones, Tribological assessment of a flexible
carbon-fibre-reinforced poly(ether-ether-ketone)
acetabular cup articulating against an alumina
femoral head, Proc. IME H J. Eng. Med. 222 (3)
(2008) 273
e
283.
[19] J. Charnley, Tissue reaction to the polytetra-
flouroethyene, Lancet II (1963) 1379.
[20] S.M. Kurtz, O.K. Muratoglu, M. Evans,
A.A. Edidin, Advances in the processing, ster-
ilization, and crosslinking of ultra-high
molecular weight polyethylene for total joint
arthroplasty, Biomaterials 20 (18)
(1999)
1659
e
1688.
[21] S.M. Kurtz, The UHMWPE Biomaterials
Handbook: Ultra-High Molecular Weight
Polyethylene in Total Joint Replacement and
Medical Devices, 2nd ed., Academic Press,
Burlington, MA, 2009.
[22] O.K. Muratoglu, S.M. Kurtz, Alternative
bearing surfaces in hip replacement, in:
R. Sinha (Ed.), Hip Replacement: Current
Trends and Controversies, Marcel Dekker, New
York, 2002, pp. 1
e
46.
[23] R. Ainsworth, G. Farling, D. Bardos, An
improved bearing material for joint replacement
prostheses: carbon fiber-reinforced UHMW
polyethylene, Trans. 3rd Soc. Biomater. 3
(1977) 119.
