Biomedical Engineering Reference
In-Depth Information
composite femoral stem strains, Biomaterials
17 (23) (1996) 2211
e
2217.
[23] B. Rohner, R. Wieling, F. Magerl, E. Schneider,
A. Steiner, Performance of a composite flow
moulded carbon fibre reinforced osteosynthesis
plate, Vet. Comp. Orthop. Traumatol. 18 (3)
(2005) 175
e
182.
[24] L. Eschbach, Nonresorbable polymers in bone
surgery, Injury 31 (Suppl. 4) (2000) 22
e
27.
[25] D. Williams, Polyetheretherketone for long-
term implantable devices, Med. Device Tech-
nol. 19 (1) (2008) 8, 10
e
11.
[26] S.M. Kurtz, J.N. Devine, PEEK biomaterials in
trauma, orthopedic, and spinal implants,
Biomaterials 28 (32) (2007) 4845
e
4869.
[27] M.C. Sobieraj, S.M. Kurtz, C.M. Rimnac, Notch
sensitivity of PEEK in monotonic tension,
Biomaterials 30 (33) (2009) 6485
e
6494.
[28] E. Wintermantel, J. Mayer, J. Blum, K.L. Eckert,
P. Luscher, M. Mathey, Tissue engineering
scaffolds using superstructures, Biomaterials 17
(2) (1996) 83
e
91.
[29] Z.M. Huang, K. Fujihara, Stiffness and strength
design of composite bone plates, Compos. Sci.
Technol. 65 (2005) 73
e
85.
[30] K. Fujihara, Z.M. Huang, S. Ramakrishna,
K. Satknanantham, H. Hamada, Feasibility of
knitted carbon/PEEK composites for ortho-
pedic bone plates, Biomaterials 25 (17) (2004)
3877
e
3885.
[31] J. Cordey, S.M. Perren, S.G. Steinemann, Stress
protection due to plates: myth or reality?
A parametric analysis made using the composite
beam theory, Injury 31 (Suppl. 3) (2000) C1
e
13.
[32] S.T. Lovald, T. Khraishi, J. Wagner, B. Baack,
Mechanical design optimization of bio-
absorbable fixation devices for bone fractures,
J. Craniofac. Surg. 20 (2) (2009) 389
e
398.
[33] S.T. Lovald, J.D. Wagner, B. Baack, Bio-
mechanical optimization of bone plates used
in rigid fixation of mandibular fractures,
J. Oral Maxillofac. Surg. 67 (5) (2009) 973
e
985.
[34] S. Lovald, B. Baack, C. Gaball, G. Olson,
A. Hoard, Biomechanical optimization of bone
plates used in rigid fixation of mandibular
symphysis fractures, J. Oral Maxillofac. Surg.
68 (8) (2010) 1833
e
1841.
[35] R.D. Zura, J.A. Browne, Current concepts in
locked plating, J. Surg. Orthop. Adv. 15 (3)
(2006) 173
e
176.
[36] C. Papakostidis, M.R. Grotz, G. Papadokostakis,
R. Dimitriou, P.V. Giannoudis, Femoral biologic
plate fixation, Clin. Orthop. Relat. Res. 450
(2006) 193
e
202.
[37] A. Yanez, J.A. Carta, G. Garces, Biomechan-
ical evaluation of a new system to improve
screw fixation in osteoporotic bones, Med. Eng.
Phys. 32 (5) (2010) 532
e
541.
[38] G. Gradl, A. Dietze, D. Arndt, M. Beck,
P. Gierer, T. Borsch, et al., Angular and sliding
stable antegrade nailing (Targon PH) for
the treatment of proximal humeral fractures,
Arch. Orthop. Trauma Surg. 127 (10) (2007)
937
e
944.
[39] S.J. Nho, M.T. Provencher, S.T. Seroyer,
A.A. Romeo, Bioabsorbable anchors in gleno-
humeral shoulder surgery, Arthroscopy 25 (7)
(2009) 788
e
793.
[40] U.S. markets for arthroscopy products. Med-
Tech Insight, 2005.
[41] M. Ruiz-Suarez, J. Aziz-Jacobo, F.A. Barber,
Cyclic load testing and ultimate failure strength
of
suture anchors
in the acetabular
rim,
Arthroscopy 26 (6) (2010) 762
e
768.
[42] F.A. Barber, M.A. Herbert, R.C. Beavis,
F. Barrera Oro, Suture anchor materials,
eyelets, and designs: update 2008, Arthroscopy
24 (8) (2008) 859
e
867.
[43] S. Rupp, R. Seil, A. Schneider, D.M. Kohn,
Ligament graft initial fixation strength using
biodegradable interference screws, J Biomed.
Mater. Res. 48 (1) (1999) 70
e
74.
[44] D.G. Nagarkatti, B.P. McKeon, B.S. Donahue,
J.P. Fulkerson, Mechanical evaluation of a soft
tissue interference screw in free tendon anterior
cruciate ligament graft fixation, Am. J. Sports
Med. 29 (1) (2001) 67
e
71.
[45] M.M. Kim, K.D. Boahene, P.J. Byrne, Use of
customized polyetheretherketone (PEEK)
implants in the reconstruction of complex
maxillofacial defects, Arch. Facial Plast. Surg.
11 (1) (2009) 53
e
57.
[46] P. Scolozzi, A. Martinez, B. Jaques, Complex
orbito-fronto-temporal reconstruction using
computer-designed PEEK implant, J. Craniofac.
Surg. 18 (1) (2007) 224
e
228.
[47] E. Chacon-Moya, J.F. Gallegos-Hernandez,
S. Pina-Cabrales, F. Cohn-Zurita, A.
Gone-Fernandez, Cranial vault reconstruction
using computer-designed polyetheretherketone
