Biomedical Engineering Reference
In-Depth Information
[2] V.C. Mow, R. Huiskes, A brief history of
science and orthopaedic biomechanics, in:
R. Huiskes (Ed.), Basic Orthopaedic Biome-
chanics and Mechano-biology, third ed, Lip-
pincott Williams & Wilkins, Philadelphia,
2005, pp. 1
e
28.
[3] J. Wolff, The Law of Bone Remodeling
(translation of the German 1892 edition),
Springer, Berlin, Heidelberg, New York, 1986.
[4] E.W. Morscher, W. Dick, Cementless fixation
of “isoelastic” hip endoprostheses manufac-
tured from plastic materials, Clin. Orthop.
Relat. Res. 176 (1983) 77
e
87.
[5] T.A. Andrew, J.P. Flanagan, M. Gerundini,
R. Bombelli, The isoelastic, noncemented total
hip arthroplasty. Preliminary experience with
400 cases, Clin. Orthop. Relat. Res. 206 (1986)
127
e
138.
[6] R. Huiskes, Failed innovation in total hip
replacement. Diagnosis and proposals for a cure,
Acta Orthop. Scand. 64 (6) (1993) 699
e
716.
[7] J.H. Kuiper, R. Huiskes, Friction and stem
stiffness affect dynamic interface motion in
total hip replacement, J. Orthop. Res. 14 (1)
(1996) 36
e
43.
[8] H. Weinans, R. Huiskes, H.J. Grootenboer,
Effects of material properties of femoral hip
components on bone remodeling, J. Orthop.
Res. 10 (6) (1992) 845
e
853.
[9] I. Jakim, C. Barlin, M.B. Sweet, RM isoelastic
total hip arthroplasty. A review of 34 cases, J.
Arthroplasty 3 (3) (1988) 191
e
199.
[10] A. Minovic, I. Milowsev, V. Pisot, A. Cor,
V. Antolic, Isolation of polyacetal wear parti-
cles from periprosthetic tissue of isoelastic
femoral stems, J. Bone Joint Surg. Br. 83 (8)
(2001) 1182
e
1190.
[11] K. Strazar, A. Cor, V. Antolic, Biological
impact of polyacetal particles on loosening of
isoelastic stems, Biomacromolecules 7 (9)
(2006) 2507
e
2511.
[12] F. Buch, T. Albrektsson, Bone formation in
porous implants of Delrin and commercially
pure titanium, Arch. Orthop. Trauma Surg.
109 (4) (1990) 227
e
230.
[13] A. Ohlin, L. Linder, Biocompatibility of poly-
oxymethylene (Delrin) in bone, Biomaterials
14 (4) (1993) 285
e
289.
[14] R. Trebse, I. Milosev, S. Kovac, M. Mikek,
V. Pisot, Poor results from the isoelastic total
hip replacement: 14
e
17-year follow-up of 149
cementless prostheses, Acta Orthop. 76 (2)
(2005) 169
e
176.
[15] O.N. Nagi, S. Kumar, S. Aggarwal, The
uncemented isoelastic/isotitan total hip
arthroplasty. A 10
e
15 years follow-up with
bone mineral density evaluation, Acta Orthop.
Belg. 72 (1) (2006) 55
e
64.
[16] C.A. Homsy, T.E. Cain, F.B. Kessler,
M.S. Anderson, J.W. King, Porous implant
systems for prosthesis stabilization, Clin.
Orthop. Relat. Res. 89 (1972) 220
e
235.
[17] H.S. Tullos, B.L. McCaskill, R. Dickey,
J. Davidson, Total hip arthroplasty with a low-
modulus porous-coated femoral component, J.
Bone Joint Surg. 66 (6) (1984) 888
e
898.
[18] W.J. Bryan, B.L. McCaskill, H.S. Tullos, Hip
endoprosthesis stabilization with a porous low
modulus stem coating: factors influencing
stabilization, Clin. Orthop. Relat. Res. 157
(1981) 125
e
132.
[19] W.C. Runne, K.J. van Sambeek, J.L. Stierum,
R.B. van Tongerloo, Femoral endoprosthesis
fixation with a soft, flexible low modulus stem
coating. Four
to six year clinical
results,
Orthopedics 12 (4) (1989) 529
e
535.
[20] G.G. Keet, W.C. Runne, The Anaform endo-
prosthesis: a proplast-coated femoral endo-
prosthesis, Orthopedics
12
(9)
(1989)
1185
e
1190.
[21] J.H. Goosen, R.M. Castelein, W.C. Runne,
D.A. Dartee, C.C. Verheyen, Long-term results
of a soft interface- (Proplast-) coated femoral
stem, Acta Orthop. 77 (4) (2006) 585
e
590.
[22] P.G. Maathuis, J.D. Visser, High failure rate of
soft-interface stem coating for fixation of
femoral endoprostheses, J. Arthroplasty 11 (5)
(1996) 548
e
552.
[23] F.P. Magee, A.M. Weinstein, J.A. Longo,
J.B. Koeneman, R.A. Yapp, A canine
composite femoral stem. An in vivo study,
Clin. Orthop. Relat. Res. 235 (1988) 237
e
252.
[24] S. Allcock, M.A. Ali, Early failure of
a carbon-fiber composite femoral component,
J. Arthroplasty 12 (3) (1997) 356
e
358.
[25] H.B. Skinner, Composite technology for total
hip arthroplasty, Clin. Orthop. Relat. Res. 235
(1988) 224
e
236.
[26] K.B. Kwarteng, C. Stark, Carbon fiber rein-
forced PEEK (APC-2/AS-4) composites for
