Biomedical Engineering Reference
In-Depth Information
using porous hydroxyapatite granules, Plast.
Reconstr. Surg. 111 (6) (2003) 1808
e
1817.
[8] P. Werner, R. Verdejo, F. W¨llecke, V. Altst¨dt,
J.K.W. Sandler, M.S.P. Shaffer, Carbon nano-
fibers allow foaming of semicrystalline
poly(ether ether ketone), Adv. Mater. 17 (23)
(2005) 2864
e
2869.
[9] A. Kramschuster, L.S. Turng, Highly porous
injection-moulded biodegradable polymer foams
for tissue engineering scaffolds, Biofoams
(2007), September 26
e
28, 2007, Capri, Italy.
[10] S. Cardeaa, A. Gugliuzzab, E. Schiavo Rappoa,
M. Acetoc, E. Driolib, E. Reverchon, Genera-
tion of PEEK-WC membranes by supercritical
fluids, Desalination 200 (2006) 58
e
60.
[11] D. Morrissette, P. Croteau, inventors. Porous
materials and method for fabricating same. US
patent W02007051307, 2007.
[12] G.L. Converse, T.L. Conrad, C.H. Merrill,
R.K. Roeder, Hydroxyapatite whisker-rein-
forced polyetherketoneketone bone ingrowth
scaffolds, Acta Biomater.
[19] J. Grohowski Jr, M. Walter, T. Macneal,
inventors. Hybrid intervertebral spinal implant.
US patent US20100092466, 2010.
[20] P. Nebosky, S. Zimmerman, G. Stalcup,
inventors. Orthopaedic implant with porous
structural member. US patent US20100042218,
2010.
[21] S. Kerr, A. Recber, T. Pepe, D. Messerli,
L. Laurence, R. Walsh, et al., inventors. Porous
biocompatible polymer material and methods.
US patent W02009099559, 2009.
[22] K.H. Tan, C.K. Chua, K.F. Leong, M.W. Naing,
C.M. Cheah, Fabrication and characterization
of three-dimensional poly(ether-ether-ketone)/
hydroxyapatite biocomposite scaffolds using
laser sintering, Proc. Inst. Mech. Eng. H 219 (3)
(2005) 183
e
194.
[23] T. Rechtenwald, G. Esser, M. Schmidt, D. Pohle,
Comparison between laser sintering of PEEK
and PA using design of experiment methods. In:
Proceedings of the 3rd International WLT
Conference on Lasers in Manufacturing (LIM
2005), 2005; pp. 263
e
267.
[24] T. Rechtenwald, F. Niebling, D. Pohle, G. Esser,
An investigation into laser sintering of PEEK.
In: Proceedings of the 4th International
Conference on Laser Assisted Net Shape Engi-
neering (LANE 2004), 2004; pp. 4/1:485
e
496.
[25] G. Zhang, H. Leparoux, Microwave sintering of
poly-ether-ether-ketone (PEEK) based coatings
deposited on metallic substrate, Scr. Mater. 55
(7) (2006) 621
e
624.
[26] M. Jarman-Smith, P. McFetridge, N. Pierre,
Preliminary evaluation of polyetheretherketone
(PEEK) fibre suitable for implantation, Trans-
actions of the 8th World Biomaterials
Congress, Amsterdam, NE, 2008.
[27] M. Jarman-Smith, P. McFetridge, N. Pierre,
Preliminary evaluation of a porous poly-
etheretherketone (PEEK) suitable for implan-
tation, Transactions of the 8th World
Biomaterials Congress, Amsterdam, NE,
2008.
[28] S.L. Edwards, J.A. Werkmeister,
J.A.M. Ramshaw, K. McLean, M.L. Jarman-
Smith, Polyetheretherketone multifilament and
monofilament woven tissue engineering scaf-
folds, Transactions Society for Biomaterials,
Society for Biomaterials, Mt. Laurel, NJ, 2010,
p. 795.
6
(3)
(2010)
856
e
863.
[13] G.L. Converse, T.L. Conrad, R.K. Roeder,
Mechanical properties of hydroxyapatite
whisker reinforced polyetherketoneketone
composite scaffolds, J. Mech. Behav. Biomed.
2 (6) (2009) 627
e
635.
[14] M.S. Abu Bakar, M.H.W. Cheng, S.M. Tang,
S.C. Yu, K. Liao, C.T. Tan, et al., Tensile
properties, tension
e
tension fatigue and bio-
logical response of polyetheretherketone
e
hydroxyapatite composites for load-bearing
orthopedic implants, Biomaterials 24 (13) (2003)
2245
e
2250.
[15] D. Choi, Y.S. Yoon, D. Hwang, Evaluation of
sleeved implant fixation using a rat model,
Med. Eng. Phys. 33 (3) (2011) 310
e
314.
[16] G. Swords,
inventor. Composite
surgical
implant made from macroporous
synthetic
resin
and
bioglass
particles. US patent
W02004009000, 2004.
[17] H. Savage, inventor. Medical implant with
bioactive material and method of making the
medical implant. US patent US20100255053,
2008.
[18] H. Savage, A. Melkent, J. Edie, J. Rouleau,
F. Bono, J. White, inventors. Intervertebral
implant with porous portions, US patent
US20080161927, 2008.
