Biomedical Engineering Reference
In-Depth Information
as
a
biomaterial
for
spinal
applications,
Tensile properties, tension
e
tension fatigue
and biological response of poly-
etheretherketone
e
hydroxyapatite composites
for load-bearing orthopedic implants, Bioma-
terials 24 (13) (2003) 2245
e
2250.
[15] S.M. Tang, P. Cheang, M.S. Abu Bakar,
K.A. Khor, K. Liao, Tension
e
tension fatigue
behavior of hydroxyapatite reinforced poly-
etheretherketone composites, Int. J. Fatigue 26
(2004) 49
e
57.
[16] K.H. Tan, C.K. Chua, K.F. Leong, C.M. Cheah,
P. Cheang, M.S. Abu Bakar, et al., Scaffold
development using selective laser sintering of
polyetheretherketone
e
hydroxyapatite bio-
composite blends, Biomaterials 24 (2003)
3115
e
3123.
[17] K.H. Tan, C.K. Chua, K.F. Leong, C.M. Cheah,
W.S. Gui, W.S. Tan, et al., Selective laser sin-
tering of biocompatible polymers for applica-
tions in tissue engineering, Biomed. Mater.
Eng. 15 (2005) 113
e
124.
[18] K.H. Tan, C.K. Chua, K.F. Leong, M.W. Naing,
C.M. Cheah, Fabrication and characterization
of three-dimensional poly(ether-ether-ketone)/
hydroxyapatite biocomposite scaffolds using
laser
Biomaterials 27 (2006) 324
e
334.
[3] S.M. Kurtz, J.N. Devine, PEEK biomaterials in
trauma,
orthopedic,
and
spinal
implants,
Biomaterials 28 (2007) 4845
e
4869.
[4] R.K. Roeder, G.L. Converse, R.J. Kane, W. Yue,
Hydroxyapatite reinforced polymer bio-
composites for synthetic bone substitutes, JOM
60 (3) (2008) 38
e
45.
[5] K. Rezwan, Q.Z. Chen, J.J. Blaker,
A.R. Boccaccini, Biodegradable and bioactive
porous polymer/inorganic composite scaffolds
for bone tissue engineering, Biomaterials 27
(2006) 3413
e
3431.
[6] W. Bonfield, M.D. Grynpas, A.E. Tully,
J. Bowman, J. Abram, Hydroxyapatite rein-
forced polyethylene
d
a mechanically compat-
ible implant material for bone replacement,
Biomaterials 2 (1981) 185
e
186.
[7] K.E. Tanner, R.N. Downes, W. Bonfield, Clin-
ical applications of hydroxyapatite reinforced
materials, Brit. Ceram. Trans. 93 (3) (1994)
104
e
107.
[8] M. Wang, R. Joseph, W. Bonfield, Hydroxy-
apatite
e
polyethylene composites for bone
substitution: effects of ceramic particle size and
morphology, Biomaterials 19 (24)
sintering,
J. Eng. Med. 219 (2005)
183
e
194.
[19] S. Yu, K.P. Hariram, R. Kumar, P. Cheang,
K.K. Aik, In vitro apatite formation and its
growth kinetics on hydroxyapatite/poly-
etheretherketone biocomposites, Biomaterials
26 (2005) 2343
e
2352.
[20] C. Hengky, B. Kelsen, Saraswati, P. Cheang,
Mechanical and biological characterization
of pressureless sintered hydroxyapatite
e
polyetheretherketone biocomposite, Inter-
national Conference on Biomedical
Engineering (ICBME) Proceedings 23 (2009)
261
e
264.
[21] L. Petrovic, D. Pohle, H. M¨nstedt,
T. Rechtenwald, K.A. Shlegel, S. Rupprecht,
Effect of
(1998)
2357
e
2366.
[9] L.D. Silvio, M.J. Dalby, W. Bonfield, Osteoblast
behaviour on HAP/PE composite surfaces with
different HA volumes, Biomaterials 23 (2002)
101
e
107.
[10] R.K. Roeder, A paradigm for the integration of
biology in materials science and engineering,
JOM 62 (7) (2010) 49
e
55.
[11] M.S. Abu Bakar, P. Cheang, K.A. Khor,
Thermal processing of hydroxyapatite rein-
forced polyetheretherketone composites, J.
Mater. Proc. Technol. 89
e
90 (1999) 462
e
466.
[12] M.S. Abu Bakar, P. Cheang, K.A. Khor, Tensile
properties and microstructural analysis of
spheroidized hydroxyapatite
e
poly (ether-
etherketone) biocomposites, Mater. Sci. Eng.
A345 (13) (2003) 55
e
63.
[13] M.S. Abu Bakar, P. Cheang, K.A. Khor, Mechan-
ical properties of injection molded hydroxy-
apatite
e
polyetheretherketone biocomposites,
Compos. Sci. Technol. 63 (2003) 421
e
425.
[14] M.S. Abu Bakar, M.H.W. Cheng, S.M. Tang,
S.C. Yu, K. Liao, C.T. Tan,
TCP filled polyetheretherketone on
osteoblast cell proliferation in vitro, J. Biomed.
Sci. 13 (2006) 41
e
46.
[22] D. Pohle, S. Ponader, T. Rechtenwald,
M. Schmidt, K.A. Shlegel, H. M¨nstedt, et al.,
Processing of three-dimensional laser sintered
polyetheretherketone composites and testing of
osteoblast proliferation in vitro, Macromol.
Symp. 253 (2007) 65
e
70.
b
et
al.,
