Biomedical Engineering Reference
In-Depth Information
applications, NASA Report, NASA/TM-
2003
e
212201 (2003).
[80] M. Ivosevic, R. Knight, S.R. Kalidindi,
G.R. Palmese, J.K. Sutter, Erosion/oxidation
resistant coatings for high temperature polymer
composites, High Perform. Polym. 15 (2003)
503
e
517.
[81] M. Ivosevic, R. Knight, S. Kalidindi,
G. Palmese, J. Sutter, Adhesive/cohesive
properties of thermally sprayed functionally
graded coatings for polymer matrix composites,
J. Therm. Spray. Technol. 14 (1) (2005) 45
e
51.
[82] S. Giancaterina, A. Rossi, A. Rivaton,
J.L. Gardette, Photochemical evolution of
poly(ether ether ketone), Polym. Degrad. Stab.
68 (1) (2000) 133
e
144.
[83] S.W. Ha, J. Mayer, B. Koch, E. Wintermantel,
Plasma-sprayed hydroxylapatite coating on
carbon fibre reinforced thermoplastic
composite materials, J. Mater. Sci. Mater. Med.
5 (1994) 481
e
484.
[84] S.W. Ha, A. Gisep, J. Mayer, E. Wintermantel,
Topographical characterization and micro-
structural interface analysis of vacuum-
plasma-sprayed titanium and hydroxyapatite
coatings on carbon fibre-reinforced poly-
(etheretherketone), J. Mater. Sci. Mater. Med.
8 (1997) 891
e
896.
[85] C. Auclair-Daigle, M.N. Bureau, J.G. Legoux,
L.H. Yahia, Bioactive hydroxyapatite coatings
on polymer composites for orthopedic
implants, J. Biomed. Mater. Res. A 73 (4)
(2005) 398
e
408.
[86] S. Beauvais, O. Decaux, Plasma sprayed
biocompatible coatings on PEEK implants, in:
Proceedings, International Thermal Spray
Conference, Beijing, China, May 14
e
17, 2007.
[87] M.N. Bureau, J.G. Legoux, S. Dimitrievska,
CaP coating on PEEK varies upon processing
conditions,
Research Society Annual Meeting, Las Vegas,
NV, USA, February 22
e
25, 2009.
[88] M.N. Bureau, A. Spring, J.G. Legoux, High
adhesion plasma-sprayed HA coating on PEEK
and other polymers, in: Proceedings, Society
for Biomaterials Annual Meeting, San Antonio,
Texas, USA, April 22
e
25, 2009.
[89] A. Gisep, R. Wieling, Osteointegrative surfaces
for CF/PEEK implants, Eur. Cell Mater. 17
(Suppl. 1) (2009) 10.
[90] D.M. Devine, L.P. Bour´, J. Hahn, A. Pearce,
E. Schneider, R. Wieling, et al. Coating of
carbon fibre reinforced PEEK implants with
titanium by vapour plasma spraying for
improved bone apposition, in: Proceedings,
Orthopaedic Research Society Annual Meeting,
2008.
[91] S. Vedova, P. Robotti, A. Fabbri, D. Zeni, M.
D'Amato, B. Monelli, Effects of plasma spray
HA coating process onto mechanical properties
of PEEK and carbon fiber reinforced PEEK, in:
Proceedings, 8th World Biomaterials Congress,
Amsterdam, The Netherlands, May 28
e
June 1,
2008.
[92] P. Robotti, S. Vedova, A. Fabbri, C. Migliaresi,
V. Fontanari, Plasma spray deposition of tita-
nium and hydroxyapatite on PEEK and CFR-
PEEK, in: Proceedings of the Society for
Biomaterials Annual Meeting, San Antonio,
Texas, USA, April 22
e
25, 2009.
[93] P. Robotti, S. Vedova, A. Fabbri, G. Zappini, C.
Migliaresi, Static and fatigue tensile properties
of titanium-coated carbon fiber-reinforced
PEEK, in: Proceedings of the 22nd European
Conference
on
Biomaterials,
Lausanne,
September 8
e
12, 2009.
[94] P. Robotti, G. Zappini, Metal and HA coating
technologies for PEEK implants, in: Proceed-
ings, MD&M conference, Minneapolis,
Minnesota, USA, October 12
e
14, 2010.
in:
Proceedings, Orthopaedic
