Biomedical Engineering Reference
In-Depth Information
unicompartimental knee arthroplasty, Acta
Biomater. 6 (9) (2010) 3601
e
3610.
[11] K. Soballe, E.S. Hansen, H. Brockstedt-
Rasmussen, C. Bunger, Hydroxyapatite coating
converts fibrous tissue to bone around loaded
implants, J. Bone Joint Surg. Br. 75 (2) (1993)
270
e
278.
[12] J. Galante, W. Rostoker, R. Lueck, R.D. Ray,
Sintered fiber metal composites as a basis for
attachment of implants to bone, J. Bone Joint
Surg. Am. 53 (1) (1971) 101
e
114.
[13] J. Galante, W. Rostoker, Fiber metal compos-
ites in the fixation of skeletal prosthesis, J.
Biomed. Mater. Res. 4 (1973) 43
e
61.
[14] R.M. Pillar, Porous-surfaced metallic implants
for orthopedic applications, J. Biomed. Mater.
Res. 21 (Suppl. A1) (1987) 1
e
33.
[15] W. Winkler-Gniewek, H. Stallforth, M. Unge-
th¨m, H. Gruner, Strucutre and properties of VPS
coatings in medical technology, in: 1st Plasma-
technik Symposium, vol. 3, 1988, p. 95
e
102.
[16] S.T. Woolson, T.J. Delaney, Failure of a proxi-
mally porous-coated femoral prosthesis in
revision total hip arthroplasty, J. Arthroplasty
10 (1995) S22
e
S28.
[17] W.G. Paprosky, R.S. Burnett, Extensively
porous-coated femoral stems in revision hip
arthroplasty:
[22] H.D. Steffens, M. Mack, Plasma spraying as an
advanced tool in surface engineering, Pure
Appl. Chem. 62 (9) (1990) 1801
e
1808.
[23] D.E. Crawmer, Introduction to coatings,
equipment, and theory, in: J.R. Davis (Ed.),
Handbook of Thermal Spray Technology, ASM
International, Materials Park, OH, 2004, pp.
43
e
46.
[24] P. Fauchais, Understanding plasma spraying, J.
Phys. Appl. Phys. 37 (2004) 86
e
108.
[25] T. Yoshida, Toward a new era of plasma spray
processing, Pure Appl. Chem. 78 (6) (2006)
1093
e
1107.
[26] M. Long, H.J. Rack, Titanium alloys in total
joint
replacement
d
a materials
science
perspective, Biomaterials
19
(18)
(1998)
1621
e
1639.
[27] K.H. Frosch, K.M. St¨rmer, Metallic biomate-
rials in skeletal repair, Eur. J. Trauma 32 (2)
(2006) 149
e
159.
[28] Y.C. Tsui, C. Doyle, T.W. Clyne, Plasma
sprayed hydroxyapatite coatings on titanium
substrates. Part 1: Mechanical properties and
residual stress levels, Biomaterials 19 (22)
(1998) 2015
e
2029.
[29] Y.C. Tsui, C. Doyle, T.W. Clyne, Plasma
sprayed hydroxyapatite coatings on titanium
substrates. Part 2: Optimisation of coating
properties, Biomaterials
rationale and results, Am.
J.
Orthop.
(Belle Mead, NJ) 31 (8)
(2002)
19
(22)
(1998)
471
e
474.
[18] F. Brossa, A. Cigada, R. Chiesa, L. Paracchini,
C. Consonni, Adhesion properties of plasma
sprayed hydroxyapatite coatings for ortho-
paedic prostheses, Biomed. Mater. Eng. 3
(1993) 127
e
136.
[19] A.V. Lombardi Jr., K.R. Berend, T.H. Mallory,
M.D. Skeels, J.B. Adams, Survivorship of 2000
tapered titanium porous plasma-sprayed
femoral components, Clin. Orthop. Relat. Res.
467 (1) (2009) 146
e
154.
[20] A. Eskelinen, V. Remes, I. Helenius, P. Pulkkinen,
J. Nevalainen, P. Paavolainen, Uncemented total
hip arthroplasty for primary osteoarthritis in
young patients: a mid- to long-term follow-up
study from the finnish arthroplasty register, Acta
Orthop. 77 (1) (2006) 57
e
70.
[21] E. Lugscheider, T. Weber, Plasma spraying
d
an
innovative coating technique: process variants
and applications, IEEE Trans. Plasma Sci. 18
(6) (1990) 968
e
973.
2031
e
2043.
[30] S.R. Paital, N.B. Dahotre, Calcium phosphate
coatings for bio-implant applications:
materials, performance factors, and methodol-
ogies, Mater. Sci. Eng. R Rep. 66 (2009)
1
e
70.
[31] H. Hahn, W. Palich, Preliminary evaluation of
porous metal surfaced titanium for orthopedic
implants, J. Biomed. Mater. Res. 4 (1970)
571
e
577.
[32] Sumitomo Chemical Co. Osaka Japan. Patent
Application No. 158745, 1975.
[33] J.F. Osborn, Implantatwerkstoff Hydrox-
ylapatitkeramik-Grundlagen und klinische
Anwendungen, Quintessenz Verlag, Berlin,
1985.
[34] J.F. Osborn, Die biologische Leistung der
Hydroxylkeramik-Beschichtung auf dem
Femurschaft einer Titanendoprothese
d
erste
histologische Auswertung eines Humanex
plantates, Biomed. Tech. 32 (1987) 177
e
183.
