Biomedical Engineering Reference
In-Depth Information
[80] J.S. Hayes, R.G. Richards, Surfaces to control
tissue adhesion for osteosynthesis with metal
implants: in vitro and in vivo studies to bring
solutions to the patient, Expert. Rev. Med.
Devices 7 (1) (2010) 131
e
142.
[81] K. Anselme, P. Davidson, A.M. Popa,
M. Giazzon, M. Liley, L. Ploux, The interac-
tion of cells and bacteria with surfaces struc-
tured at the nanometre scale, Acta Biomater. 6
(10) (2010) 3824
e
3846.
[82] E.P. Ivanova, V.K. Truong, J.Y. Wang,
C.C. Berndt, R.T. Jones, et al., Impact of
nanoscale roughness of titanium thin film
surfaces on bacterial retention, Langmuir 26
(3) (2010) 1973
e
1982.
[83] M.R. Park, M.K. Banks, B. Applegate,
T.J. Webster, Influence of nanophase titania
topography on bacterial attachment and
metabolism, Int. J. Nanomedicine 3 (4) (2008)
497
e
504.
[84] T. Kerbstadt, Ch Bichler, H.-C. Langowski,
U. Moosheimer, Plasma-modified interfaces
between polypropylene films and vacuum roll-
to-roll coated thin barrier layers, Surf. Coat.
Technol. 112 (1
e
3) (1999) 373
e
378.
[85] G. Altankov, T. Groth, Reorganization of
substratum-bound fibronectin on hydrophilic
and hydrophobic materials is related to
biocompatibility, J. Mater. Sci. Mater. Med. 5
(1994) 732
e
737.
[86] J.A. Chinn, T.A. Horbett, B.D. Ratner, Labo-
ratory preparation of plasticware to support
cell culture: surface modification by radio
frequency glow discharge deposition of
organic vapors, Methods Cell. Sci./J. Tissue
Culture Methods 16 (1994) 155
e
159.
[87] A.J. Garcia, B.G. Keselowsky, Biomimetic
surfaces for control of cell adhesion to facili-
tate bone formation, Crit. Rev. Eukaryot.
Gene. Expr. 12 (2) (2002) 151
e
162.
[88] A.J. Garcia, C.D. Reyes, Bio-adhesive surfaces
to promote osteoblast differentiation and bone
formation, J. Dent. Res. 84 (5) (2005) 407
e
413.
[89] B.D. Ratner, Surface modification of poly-
mers: chemical, biological and surface
analytical challenges, Biosens. Bioelectron. 10
(9
e
10) (1995) 797
e
804.
[90] G.P. Lopez, B.D. Ratner, C.D. Tidwell,
C.L. Haycox, R.J. Rapoza, T.A. Horbett, Glow
discharge plasma deposition of tetraethylene
glycol dimethyl ether for fouling-resistant
biomaterial surfaces, J. Biomed. Mater. Res.
26 (4) (1992) 415
e
439.
[91] M.C. van Loosdrecht, J. Lyklema, W. Norde,
G. Schraa, A.J. Zehnder, The role of bacterial
cell wall hydrophobicity in adhesion, Appl.
Environ. Microbiol.
53
(8)
(1987)
1893
e
1897.
[92] N.P. Boks, H.J. Kaper, W. Norde, H.C. van
der Mei, H.J. Busscher, Mobile and immo-
bile adhesion of staphylococcal strains to
hydrophilic and hydrophobic surfaces,
J.
Colloid.
Interface Sci. 331 (1)
(2009)
60
e
64.
[93] N.P. Boks, W. Norde, H.C. van der Mei,
H.J. Busscher, Forces involved in bacterial
adhesion to hydrophilic and hydrophobic
surfaces, Microbiology 154 (Pt 10) (2008)
3122
e
3133.
[94] G.M. Bruinsma, H.C. van der Mei,
H.J. Busscher, Bacterial adhesion to surface
hydrophilic and hydrophobic contact lenses,
Biomaterials 22 (24) (2001) 3217
e
3224.
[95] N. Cerca, G.B. Pier, M. Vilanova, R. Oliveira,
J. Azeredo, Quantitative analysis of adhesion
and biofilm formation on hydrophilic and
hydrophobic surfaces of clinical isolates of
Staphylococcus epidermidis, Res. Microbiol.
156 (4) (2005) 506
e
514.
[96] A.H. Hogt, J. Dankert, J.A. de Vries, J. Feijen,
Adhesion of coagulase-negative staphylococci
to biomaterials, J. Gen. Microbiol. 129 (9)
(1983) 2959
e
2968.
[97] M.J. Miller, D.G. Ahearn, Adherence of
Pseudomonas aeruginosa to hydrophilic
contact lenses and other substrata, J. Clin.
Microbiol. 25 (8) (1987) 1392
e
1397.
[98] M.C. van Loosdrecht, J. Lyklema, W. Norde,
G. Schraa, A.J. Zehnder, Electrophoretic
mobility and hydrophobicity as a measure to
predict the initial steps of bacterial adhesion,
Appl. Environ. Microbiol. 53 (8)
(1987)
1898
e
1901.
[99] K. Vacheethasanee, J.S. Temenoff,
J.M. Higashi, A. Gary, J.M. Anderson,
R. Bayston, et al., Bacterial surface properties
of clinically isolated Staphylococcus epi-
dermidis strains determine adhesion on poly-
ethylene, J. Biomed. Mater. Res. 42 (3) (1998)
425
e
432.
