Graphics Programs Reference
In-Depth Information
You have created a new parcel near the front entrance that will be
used for a community clubhouse and administrative offices.
FiGuRE 12.6
Snapping to the end of
the curve to begin creating a new parcel line
FiGuRE 12.7
Snapping to a location that is
perpendicular to the eastern lot line
8.
Click Parcel
➢
Parcel Creation Tools on the Home tab of the ribbon.
In an actual project, to
delineate this boundary
properly, you would
probably offset it a
short distance behind
the fence so the fence
is entirely on the
landowner's property.
You have created a new
parcel that will remain
the property of the
original landowner.
9.
Click Draw Tangent - Tangent With No Curves, and then click OK to
dismiss the Create Parcels - Layout dialog box.
10.
Using the Endpoint object snap, trace the fence line that surrounds
the existing farm buildings. Begin at the north end of the fence, and
work toward the south and west.
11.
Once you have selected the last point on the fence, use the
Perpendicular object snap to select the western boundary line,
as shown in Figure 12.8.
12.
Press Esc twice to exit the Parcel command.
◀
13.
Save and close the drawing.
You can view the results of successfully completing this exercise by opening
Using the Lot Line Tools - Complete.dwg
.
