Graphics Programs Reference
In-Depth Information
tAB l E 12 .1 Important lot-line tools
icon
to o l
Add Fixed Line - Two Points
Add Fixed Curve (Three Point)
Add Fixed Curve (Two Points And Radius)
Draw Tangent - Tangent With No Curves
Exercise 12.2: Create Parcels using the
lot line tools
If you haven't already
done so, download
and install the files for
Chapter 12 according to
the instructions in the
Introduction.
In this exercise, you'll draw new parcel geometry using the Parcel Creation
Tools command. You'll create a common area parcel near the entrance to the
development as well as a parcel representing land that is to remain the prop-
erty of the individual owner.
1. Open the drawing named Using the Lot Line Tools.dwg located in
the Chapter 12 class data folder.
2. On the Home tab of the ribbon, click Parcel  Parcel Creation Tools.
3. On the Parcel Layout Tools toolbar, click Add Fixed Line - Two
Points. Click OK to accept the defaults in the Create Parcels -
Layout dialog box.
4. Zoom in to Jordan Court near station 4+00 (0+100). Hold down the
Shift key, and right-click to open the Object Snap context menu.
5. Click Endpoint. Then click the end of the magenta curve at station
4+20.38 (0+128.13), as shown in Figure 12.6.
6. Hold down the Shift key, and right-click. Select Perpendicular.
7. Click the magenta back-lot line, as shown in Figure 12.7. Press Esc
twice to end the command.
Search WWH ::




Custom Search