Graphics Programs Reference
In-Depth Information
2. On the Annotate tab of the ribbon, click Add Labels. In the Add
Labels dialog box, do the following:
a. For Feature, select Section View.
b. For Label Type, select Offset Elevation.
c. For Offset Elevation Label Style, verify that Offset Over
Elevation is selected.
d. For Marker Style, verify that Basic is selected.
e. Click Add.
3. Click one of the grid lines of the section view. Right-click while hold-
ing down the Shift key, and then select Endpoint. Click the flowline
of the left curb.
The flowline is located
at the bottom of the
vertical curb face. This
is where the flow of
water is concentrated
during a rainfall event.
4. Press Esc to clear the current command. Click the newly created label,
and drag its square grip up and to the left to improve its readability.
5. Click the label, and then click Edit Label Text on the ribbon. This
opens the Text Component Editor dialog box.
6. In the window on the right, click just to the left of the word Offset to
place your cursor in the position before it. Type CURB FLOWLINE ,
and press Enter.
The result should look like Figure 11.11.
FiGuRE 11.11 Customizing the label contents for a
section view label
7. Click OK to close the Text Component Editor dialog.
The label should now appear as shown in Figure 11.12.
8. Save and close the drawing.
Search WWH ::




Custom Search