Graphics Programs Reference
In-Depth Information
7.
Add a band showing offset values by applying these settings:
▶
Type: Section Data
▶
Style: Design - Offsets
▶
Gap:
0
▶
Label Start Offset: Checked
▶
Label End Offset: Checked
8.
Access the Bands tab of the Section View Properties dialog box again.
Click Save As Band Set.
9.
Enter
Sta-Elev-Rock Depth
in the Name field, and click OK. Click OK
to close the Section View Properties dialog box.
10.
Press Esc to clear the previous selection. Click the section view to the
north, and then click Section View Properties on the ribbon.
11.
On the Bands tab of the Section View Properties dialog box, click
Import Band Set. Select Sta-Elev-Rock Depth, and click OK.
12.
Select EG for Section1 of the first two bands. Select Rock as Section2
of the second band. Click OK.
The bands for this section view now match the bands of the section
view that you modified in steps 2 through 7 (see Figure 11.7).
FiGuRE 11.7
A section view with bands added for
existing ground elevations, rock depth, and offsets
13.
Repeat steps 10 through 12 to add the same band set to the third
design section view.
14.
Press Esc to clear the previous selection. Zoom out, and pan north to
the sheets of section views. Click one of the section views, and then
click View Group Properties on the ribbon.
