Graphics Programs Reference
In-Depth Information
2.
Click the Jordan Court FGCL profile, and then click Edit Profile
Labels on the ribbon.
◀
3.
In the Profile Labels - Jordan Court FGCL dialog box, select Crest
Curves as Type.
Refer to the section,
“Profile Terminology,”
in Chapter 7 to review
information about crest
curves and sag curves.
4.
Select Crest Only for Profile Crest Curve Label Style, and then
click Add.
5.
Click OK to return to the drawing. All the crest curves in the profile
are labeled.
6.
Click the Jordan Court FGCL profile, and then click Edit Profile
Labels on the ribbon again. Add the following profile labels:
ty p e
Style
Sag Curves
Sag Only
Lines
Percent Grade
Grade Breaks
Station over Elevation
The list of labels should appear as shown in Figure 8.6.
The profile is now
annotated with several
types of labels. Some
of the label positions
need to be adjusted to
improve readability,
which you'll do next.
FiGuRE 8.6
The list of labels to be applied to the Jordan Court
FGCL profile
7.
Click OK to close the Profile Labels - Jordan Court FGCL dialog box
and return to the drawing. Press Esc to clear the selection in the
drawing.
◀
8.
Zoom in to the third curve label from the left.
◀
9.
Click the label to show its grips. Then click the diamond-shaped grip
at the base of the dimension text, and move it up until the label is
more readable.
Notice how the curve-
length dimension line
is crossing through
the profile.
