Modeling and Design of Net ZEBs as Integrated Energy Systems - Modeling, Design, and Optimization of Net-Zero Energy Buildings - page 103

Praene, J.P., Garde, F., and Lucas, F. (2005) Steady state model of a solar
evacuated tube collector on sensitivity analysis. Paper presented at: 2005
ASME International Mechanical Engineering Congress and Exposition,
IMECE 2005, November 5, 2005 - November 11, 2005 (Orlando, FL,
United states: American Society of Mechanical Engineers) .
PVSAT-2 (2006) Intelligent Performance Check of PV System Operation
Based on Satellite Data (European Commission thematic programme
Energy, Environment, and Sustainable Development).
PVsyst (2012) PVSyst (Version 5.66) ( http://www.pvsyst.com/en/ ).
Ren, M.J. and Wright, J.A. (1998) A ventilated slab thermal storage system
model. Building and Environment , 33 , 43-52.
Schnieders, J. (1997) Comparison of the energy yield predictions of
stationary and dynamic solar collector models and the models' accuracy in
the description of a vacuum tube collector. Solar Energy , 61 , 179-190.
Seem, J.E., Klein, S.A., Beckman, W.A., and Mitchell, J.W. (1989)
Comprehensive room transfer functions for efficient calculation of the
transient heat transfer processes in buildings. Transactions of ASME , 111 ,
264-273.
Shah, L.J. and Furbo, S. (1998) Correlation of experimental and theoretical
heat transfer in mantle tanks used in low flow SDHW systems. Solar
Energy , 64 , 245-256.
Skoplaki, E. and Palyvos, J.A. (2009) On the temperature dependence of
photovoltaic module electrical performance: a review of efficiency/power
correlations. Solar Energy , 83 , 614-624.
Spitler, J.D. and Fisher, D.E. (1999) On the relationship between the
radiant time series and transfer function methods for design cooling load
calculations. HVAC&R Research , 5 , 123-136.
Spitler, J.D., Fisher, D.E., and Pedersen, C.O. (1997) The radiant time
series cooling load calculation procedure. ASHRAE Transactions , 103 ,
503-518.
Stephenson, D.G. and Mitalas, G.P. (1967) Cooling load calculations by
thermal response factor method. ASHRAE Transactions , 73 , 1-7.