Biomedical Engineering Reference
In-Depth Information
60. Roh, K.H., Martin, D.C., and Lahann, J., Biphasic Janus particles with nanoscale anisotropy,
Nature
Materials
, 4, 759, 2005.
61. Xie, J.W., Marijnissen, J.C.M., and Wang, C.H., Microparticles developed by electrohydrodynamic
atomization for the local delivery of anticancer drug to treat C6 glioma
in vitro,
Biomaterials
, 27, 3321,
2006.
62. Leeuwenburgh, S.C.G. et al., Infl uence of deposition parameters on morphological properties of bio-
medical calcium phosphate coatings prepared using electrostatic spray deposition,
Thin Solid Films
,
472, 105, 2005.
63. Leeuwenburgh, S.C.G. et al., Morphology of calcium phosphate coatings for biomedical applications
deposited using electrostatic spray deposition (ESD),
Thin Film Solid
, 503, 69, 2006.
64. Yu, Y. et al., Highly porous spongelike ceramic fi lms with bimodal pore structure prepared by electro-
static spray deposition technique,
Aerosol Science and Technology
, 39, 276, 2005.
65. Chen, C.H. et al., Morphology control of thin LiCoO
2
fi lms fabricated using the electrostatic spray
deposition (ESD) technique,
Journal of Materials Chemistry
, 6, 765, 1996.
66. Rammelt, S. et al., Coating of titanium implants with collagen, RGD peptide and chondroitin sulfate,
Biomaterials
, 27, 5561, 2006.
67. Brodie, J.C. et al., Osteoblast interactions with calcium phosphate ceramics modifi ed by coating with
type I collagen,
Journal of Biomedical Materials Research A
, 73A, 409, 2005.
68. Leeuwenburgh, S.C.G. et al., Infl uence of precursor solution parameters on chemical properties of cal-
cium phosphate coatings prepared using electrostatic spray deposition (ESD),
Biomaterials
, 25, 641,
2004.
69. LeGeros, R.Z., Biodegradation and bioresorption of calcium phosphate ceramics,
Clinic Materials
, 14,
65, 1993.
70. Layrolle, P., De Groot, K., and Van Blitterswijk, C.A., Biomimetic hydroxyapatite coating on Ti6Al4V
induced by pre-calcifi cation,
Bioceramics
,
11, 465, 1998.
71. Leeuwenburgh, S.C.G. et al., Deposition of calcium phosphate coatings with defi ned chemical proper-
ties using the electrostatic spray deposition technique,
Journal of the European Ceramic Society
, 26,
487, 2006.
72. Leeuwenburgh, S.C.G. et al.,
In vitro
and
in vivo
reactivity of porous, electrosprayed calcium phosphate
coatings,
Biomaterials
, 27, 3368, 2006.
73. Kim, B.H., Hydroxyapatite layers prepared by sol-gel assisted electrostatic spray deposition,
Ceramics
International,
33, 119, 2007
.
74. Hoyer, B. et al., Electrostatic spraying: a novel technique for preparation of polymer coatings on elec-
trodes,
Analytical Chemistry
, 68, 3840, 1996.
75. Morota, K. et al., Poly(ethylene oxide) thin fi lms produced by electrospray deposition: morphology
control and additive effects of alcohols on nanostructure,
Journal of Colloid and Interface Science
, 279,
484, 2004.
76. Berkland, C., Pack, D.W., and Kim, K., Controlling surface nano-structure using fl ow-limited fi eld-
injection electrostatic spraying (FFESS) of poly(d,l-lactide-
co
-glycolide),
Biomaterials
, 25, 5649, 2004.
77. Morozov, V.N. and Morozova, T.Y., Electrospray deposition as a method to fabricate functionally active
protein fi lms,
Analytical Chemistry
, 71, 1415, 1999.
78. Uematsu, I. et al., Surface morphology and biological activity of protein thin i lms produced by electro-
spray deposition,
Journal of Colloid and Interface Science
, 269, 336, 2004.
79. Lee, B. et al., Fabrication of a protein fi lm by electrospray deposition method and investigation of pho-
tochemical properties by persistent spectral hole burning,
Biomaterials
, 24, 2045, 2003.
80. Buchko, C.J., Kozloff, K.M., and Martin, D.C., Surface characterization of porous, biocompatible pro-
tein polymer thin fi lms,
Biomaterials
, 22, 1289, 2001.
81. Matsuzawa, M., Krauthamer, V., and Potember, R.S., Directional guidance of neurite outgrowth using
substrates patterned with biomaterials,
Biosystems
, 35, 199, 1995.
82. Biebricher, A. et al., Controlled three-dimensional immobilization of biomolecules on chemically pat-
terned surfaces,
Journal of Biotechnology
, 112, 97, 2004.
83. Gates, B.D. et al., New approaches to nanofabrication: molding, printing, and other techniques,
Chemi-
cal Reviews
, 105, 1171, 2005.
84. Blake, T.A. et al., Preparative linear ion trap mass spectrometer for separation and collection of purifi ed
proteins and peptides in arrays using ion soft landing,
Analytical Chemistry
, 76, 6293, 2004.
85. Ouyang, Z. et al., Preparing protein microarrays by soft-landing of mass-selected ions,
Science
, 301,
1351, 2003.
