Working with Solid Models and Weldments - Autodesk Inventor 2010: No Experience Required - page 177

7. Change the 7.75 overall width of the title block to 8 .
8. Right-click QA in the title block, and choose Edit Text.
9. In the Format Text dialog (see Figure 4.24), change QA to MASS and
click OK to save the change.
FIGURE 4.24 Editing the title block text
10. Right-click the text that reads <ENG APPROVED BY> , and copy it to
the Windows Clipboard.
11. Paste a copy back into the title block, and click and drag it under the
word MASS .
12. Right-click the new text, and select Edit Text as you did before.
In this case, the text isn't really text: it's a property value. Among
the iProperties of a fi le is a property for approval. The value you put
in the iProperties automatically appears in the title block because
the link is here. You need to use a different value for Mass, though.
13. In the dialog box, pick <ENG APPROVED BY>, and press the Delete
key to dispose of the current value.
14. From the Type pull-down just above the text window, select Physical
Properties - Model. From the Property pull-down, select Mass.
15. On the Precision pull-down, set the value to two decimal places.