Designing Roads - Autodesk Roadway Design for Infraworks 360 Essentials - page 54

If you are continuing from the previous
exercise, you can skip to step 3. Otherwise, if
you haven't already done so, go to the topic's
web page at www.sybex.com/go/
roadwayessentials and download the files for
Chapter 2. Unzip the files to the correct location
on your hard drive according to the instructions
in the introduction.
1. If it is not already open, launch InfraWorks
360.
2. On the Start Page, click Open and browse to
C:\InfraWorks Roadway
Essentials\Chapter 02\ . Click Ch02
Bimsville Roads.sqlite and click
Open.
3. Select the Ex_2_4 proposal. You should see
the model as it would appear at the end of
Exercise 2.3 with the edits made to the road.
4. Restore the bookmark named Bridge 2.
5. Click the bypass road to display the Road
asset card. If the Edit Mode property is not
visible, right-click the road and select Edit
on the context menu.
6. Click the link next to Edit Mode and choose
Style, as shown in Figure 2-18 .