Designing Roads - Autodesk Roadway Design for Infraworks 360 Essentials - page 85

Curve 2 Radius This is the radius of
the curve adjacent to the normal road
width. This option is not available when
Type is set to Linear or Curve-Reverse
Curve.
Reverse Curve Radius This is the
radius of the reverse curve adjacent to
Curve 1. This option is not available
when Type is set to Linear or
Curve-Tangent-Curve.
A Way Back
You may have noticed the arrow icon
at the bottom left corner of each of the
asset cards associated with
intersections. This icon will get you
back to an original state which will
vary based on which asset card you're
dealing with. For the Intersection asset
card, this will undo any changes that
you've made after first selecting a
design vehicle. This includes graphical
edits with gizmos or any changes to the
numerical design values on the asset
card itself. For the Turning Zone asset
card, the behavior is similar to that of
the Intersection asset card, but the
reset is limited to just the turning zone
you've selected. And finally, for the