Hardware Reference
In-Depth Information
Figure 5-61.
Use a screwdriver to work the steel RF shielding plate
back and forth until it snaps out
Figure 5-62.
Slide the optical drive into the bay
Figure 5-63.
Secure the optical drive with at least two screws per
side
Figure 5-64.
Connect power to the optical drive
Locate the free end of the SATA data cable for the optical
drive in the mess of cables on the right side of the case,
and route the connector end back into the main com-
partment through an access cutout near the optical drive.
Align the L-shaped keys on the power cable connector
and the drive connector, and press the data connector
into place, as shown in Figure 5-65.
Figure 5-65.
Connect the SATA data cable to the optical drive
