Hardware Reference
In-Depth Information
Figure 4-4.
Remove the two screws that secure it, and then re-
move the left side panel
Figure 4-5.
Remove and discard the I/O shield supplied with the
case
InstallingthePowerSupply
The next step is to install the power supply in the lower chamber. To begin,
remove the parts box, as shown in Figure 4-6, and set it aside. This box con-
tains screws, spare cable ties, drive rails for the 5.25” drive bays, an adapter
to secure a 3.5” drive in a 5.25” bay, and a bezel for a 3.5” drive that requires
external access.
Release the cable wraps that secure the power supply cables into bundles.
Extend and sort out the various cables, and leave them hanging loose for now.
Working from inside the case, slide the power supply into position, as shown
in Figure 4-7.
Figure 4-6.
Remove the parts box and set it aside
Figure 4-7.
Slide the power supply into position
