Geology Reference
In-Depth Information
References
Abe T, Nagaki S (1981) Finite element modelling of Taylor slips in fcc polycrystals. In: Hansen
N, Horsewell A, Leffers T, Lilholt H (eds) Deformation of polycrystals: mechanisms and
microstructures, Roskilde, Denmark, Risø National Laboratory, pp 125-130
Ahlquist CN, Gasca-Neri R, Nix WD (1970) A phenomenological theory of steady state creep
based on average internal and effective stress. Acta Metall 18:663-671
Aladag E, Davis LA, Gordon RB (1970) Cross-slip and plastic deformation of NaCl single and
polycrystals at high pressure. Phil Mag 21:469-478
Alexander H, Haasen P (1968) Dislocations and plastic flow in the diamond structure. Solid State
Phys 22:27-158
Amelinckx S (1979) Dislocations in particular structures. In: Nabarro FRN (ed) Dislocations in
solids. North-Holland Publ. Co., Amsterdam, pp 67-460
Ankem S, Margolin H (1982) Finite element method (FEM) calculations of stress-strain
behaviour of alpha-beta Ti-Mn alloys: Part I. Stress-straion relations. Part II. Stress and strain
distributions. Metall Trans A 13A, 595-601:603-609
Ardell AJ (1985) Precipitation hardening. Metall Trans A 16A:2131-2165
Ardell AJ, Przystupa MA (1984) Dislocation link-length statistics and elevated temperature
deformation of crystals. Mech Materials 3:319-332
Armstrong R, Codd I, Douthwaite RM, Petch NJ (1962) Plastic deformation of polycrystalline
aggregates. Phil Mag 7:45-58
Asaro RJ, Needleman A (1984) Flow localization in strain hardening crystalline solids. Scripta
Met 18:429-435
Asaro RJ, Needleman A (1985) Texture development and strain hardening in rate dependent
polycrystals. Acta Metall 33:923-953
Ashby
MF
(1970)
The
deformation
of
plastically
non-homogeneous
materials.
Phil
Mag
21:399-424
Ashby MF (1971) The deformation of plastically non-homogeneous alloys. In: Kelly A and
Nicholson RB (eds) Strengthening methods of crystals. Applied Science Publishers, London,
pp 137-192
Bailey RW (1926) Note on the softening of strain hardening metals and its relation to creep. J Inst
Metals 35:27-43
Barrett CS (1943) Structure of Metals. McGraw-Hill, New York, 567 pp
Basinski SJ, Basinski ZS (1979) Plastic deformation and work hardening. In: Nabarro FRN (ed)
Dislocations in solids. North Holland Publ Co, Amsterdam, pp 261-362
Berveiller M, Zaoui A (1978) An extension of the self-consistent scheme to plastically-deforming
polycrystals. J Mech Phys Solids 26:325-344
Berveiller M, Zaoui A (1981) A simplified self-consistent scheme for the plasticity of two-phase
metals. Res Mechanica Lett 1:119-124
Berveiller M, Hiki A, Zaoui A (1981) Self-consistent schemes for the plasticity of polycrystalline
and multiphase materials. In: Lilholt H (ed) Deformation of polycrystals: mechanisms and
microstructures. Risø National Laboratory, Roskilde, Denmark, pp 145-156
Bilby BA (1955) Types of dislocation source. In: Report of the conference on defects in
crystalline solids held at the H H Wills Physical Laboratory University of Bristol July 1944,
London, The Physical Society, pp 124-133
Bishop JFW (1953) A theoretical examination of the plastic deformation of crystals by glide. Phil
Mag 44:51-64
Bishop JFW (1954) A theory of the tensile and compressive textures of face-centred cubic metals.
J Mech Phys Solids 3:130-142
Bishop JFW, Hill R (1951) A theory of the plastic distortion of a polycrystalline aggregate under
combined stresses. Phil Mag 42:414-427
Blacic JD, Christie JM (1984) Plasticity and hydrolytic weakening of quartz single crystals.
J Geophys Res 89:4223-4239
