Hardware Reference
In-Depth Information
4. Connect to the device by selecting
Open
.
5. Enter the following commands to the device through the terminal window:
The
OK
response comes back from the device as you enter each command. The first
device is now configured. Remove it from the small XBee-specific shield and plug it into
the Arduino XBee shield.
Now, plug the second device into the small XBee shield and then plug it into the PC. Note
that it might choose a different COM port; go to the
Devices and Printers
selection,
double-click on the device, and select the
Hardware
tab to find the COM port. Follow the
same steps to configure the second device, except that there are two changes. The
ATMY
value will be 2, and the
ATDL
value will be 1. The following screenshot shows the termin-
al window for these commands:
