Civil Engineering Reference
In-Depth Information
Callaghan, J.P. and McGill, S.M., Intervertebral disc herniation: studies on a porcine model exposed to
highly repetitive flexion
extension motion with compressive force, Clin. Biomech., 16, pp. 28-37,
/
2001.
Callaghan, J.P., Salewytsch, A.J., and Andrews, D.M., An evaluation of predictive methods for estimating
cumulative spinal loading, Ergonomics, 44, pp. 825-837, 2001.
Carter, D.R. and Caler, W.E., Cycle-dependent and time-dependent bone fracture with repeated loading,
J. Biomech. Eng., 105, pp. 166-170, 1983.
Carter, D.R. and Hayes, W.C., Fatigue life of compact bone — I. Effects of stress amplitude, temperature
and density, J. Biomech., 9, pp. 27-34, 1976.
Cavanaugh, J.M., Kallakuri, S., and
¨
zaktay, A.C., Innervation of the rabbit lumbar intervertebral disc
and posterior longitudinal ligament, Spine, 20, pp. 2080-2085, 1995.
Danz, M.E. and Ayoub, M.M., The effects of speed, frequency, and load on measured hand forces for a
floor to knuckle lifting task, Ergonomics, 35, pp. 833-843, 1992.
Daynard, D., Yassi, A., Cooper, J.E., Tate, R., Norman, R., and Wells, R., Biomechanical analysis of peak
and cumulative spinal loads during simulated patient-handling activities: a substudy of a random-
ized controlled trial to prevent lift and transfer injury of health care workers, App. Ergon., 32,
pp. 199-214, 2001.
Genaidy, A.M., Waly, S.M., Khalil, T.M., and Hidalgo, J., Spinal compression tolerance limits for the
design of manual material handling operations in the workplace, Ergonomics, 36, pp. 415-434,
1993.
Godin, C.A., Andrews, D.M., and Callaghan, J.P., Cumulative low back loads of non-occupational tasks
using “3DMatch”, a 3-dimensional video-based posture sampling approach, in 34th Annual
Conference of the Association of Canadian Ergonomists, Association of Canadian Ergonomists,
London, 2003.
Granata, K.P., Marras, W.S., and Davis, K.G., Variation in spinal load and trunk dynamics during
repeated lifting exertions, Clin. Biomech., 14, pp. 367-375, 1999.
Gunning, J.L., Callaghan, J.P., and McGill, S.M., Spinal posture and prior loading history modulate com-
pressive strength and type of failure in the spine: a biomechanical study using a porcine cervical
spine model, Clin. Biomech., 16, pp. 471-480, 2001.
Hansson, T.H., Keller, T.S., and Spengler, D.M., Mechanical behavior of
the human lumbar
spine.
II. Fatigue strength during dynamic compressive loading,
J. Orthop. Res.,5,pp.
479-487, 1987.
Hardy, W.G., Lissner, H.R., Webster, J.E., and Gurdjian, E.S., Repeated loading tests of the lumbar spine,
Surg. Forum, 9, pp. 690-695, 1958.
Holm, S. and Nachemson, A., Variations in the nutrition of the canine intervertebral disc induced by
motion, Spine, 8, pp. 866-874, 1983.
Iatridis, J.C., Mente, P.L., Stokes, I.A., Aronsson, D.D., and Alini, M., Compression-induced changes in
intervertebral disc properties in a rat tail model, Spine, 24, pp. 996-1002, 1999.
Jackson, J., Reed, B., Andrews, D.M., Albert, W.J., and Callaghan, J.P., Usability of 3D-Match —An evalu-
ation of the inter- and intra-observer reliability of posture matching to calculate cumulative low
back loading, in 34th Annual Conference of the Association of Canadian Ergonomists, Association
of Canadian Ergonomists, London, 2003.
Jager, M., Jordan, C., Luttmann, A., and Laurig, W., Evaluation and assessment of lumbar load during
total shifts for occupational manual materials handling jobs within the Dortmund Lumbar
Load Study — DOLLY, Int. J. Ind. Ergon., 25, pp. 553-571, 2000.
Keown, K.J., Andrews, D.M., and Callaghan, J.P., Predicting cumulative low back loading during
repetitive lifting: determining the number of trials needed to represent workday conditions, in
XVI International Annual Occupational Ergonomics and Safety Conference, University of
Windsor, Toronto, ON, Canada, 2002.
Kumar, S., Cumulative load as a risk factor for back pain, Spine, 15, pp. 1311-1316, 1990.
Search WWH ::
Custom Search