Control Hubs: Bringing It All Together - Smart Home Automation with Linux and Raspberry Pi - page 251

Figure 7-5. Using the web to switch your lights on or make a cuppa
This has a number of configuration files because of its complexity, which I will cover now. (All paths are relative
to the Minerva's web home directory.)
warp/conf/x10/x10.conf : This controls the mood or scenes bar that appears underneath
the main X10 control map. This normally includes references like “all lights off ” and
“film mood.” You need to program a list of scenes and the code that will be run when the
corresponding scene is selected.
zinc/conf/x10floorplan.conf : This contains a list of X10 devices in the house and their
respective floor index, X, and Y positions on the floor plan maps. These names must match
the devices in either Hu format (such as E3) or by alias names, as provided in the heyu
configuration file ( /etc/heyu/x10.conf ). This file also contains the names for each floor in
the house.
warp/applets/x10/img : In addition to the standard X10 graphics for lightbulbs and
appliance switches, this directory should also contain the floor plan maps, stored as
floor0.png , floor1.png , and so on.