Optimal Placement of Controller for Seismic Structures - Design Optimization of Active and Passive Structural Control Systems - page 30

REFERENCES Tsuji, M., & Nakamura, T. (1996). Optimal

viscous dampers for stiffness design of shear
buildings. Structural Design of Tall Build-
ings , 5 , 217-234. doi:10.1002/(SICI)1099-
1794(199609)5:3<217::AID-TAL70>3.0.CO;2-R

Ashour, S. A., & Hanson, R. D. (1987). Elastic
seismic response of buildings with supplemental
damping. Report No. UMCE- 87-1 . Department
of Civil Engineering, University of Michigan.

Zhang, R. H., & Soong, T. T. (1992). Seismic
design of viscoelastic dampers for structural ap-
plications. Journal of Structural Engineering ,
118 (5), 1375-1392. doi:10.1061/(ASCE)0733-
9445(1992)118:5(1375)

Cimellaro, G. P., Soong, T. T., & Reinhorn, A.
M. (2009). Integrated design of controlled linear
structural systems. Journal of Structural Engi-
neering , 135 (7), 853-862. doi:10.1061/(ASCE)
ST.1943-541X.0000032

Gluck, N., Reinhorn, A., & Levy, R. (1996).
Design of supplemental dampers for control of
structures. Journal of Structural Engineering ,
122 (12), 1394-1399. doi:10.1061/(ASCE)0733-
9445(1996)122:12(1394)

ADDITIONAL READING

Aydin, E., Boduroglu, M. H., & Guney, D. (2006).
Optimal damper distribution for seismic rehabili-
tation of planar building structures. Engineering
Structures , 29 (2).

Milman, M. H., & Chu, C.-C. (1994). Optimi-
zation methods for passive damper placement
and tuning. Journal of Guidance, Control, and
Dynamics , 17 (4), 848-856. doi:10.2514/3.21275

Bhaskararao, A. V., & Jangid, R. S. (2006). Seis-
mic analysis of structures connected with friction
dampers. Engineering Structures , 28 (5), 690-703.
doi:10.1016/j.engstruct.2005.09.020

Nakamura, T., & Tsuji, M. (1996). Inverse damp-
ing perturbation for stiffness design of shear
buildings. Journal of Structural Engineering ,
122 (6), 617-625. doi:10.1061/(ASCE)0733-
9445(1996)122:6(617)

Cimellaro, G. P. (2007). Simultaneous stiffness-
damping optimization of structures with respect
to acceleration, displacement and base shear.
Engineering Structures , 29 (11), 2853-2870.
doi:10.1016/j.engstruct.2007.01.001

Ohtori, Y., Christenson, R. E., Spencer, B. F., &
Dyke, S. J. (2004). Nonlinear benchmark control
problem for seismically excited buildings. Jour-
nal of Engineering Mechanics , 130 (4), 366-385.
doi:10.1061/(ASCE)0733-9399(2004)130:4(366)

Cimellaro, G. P. (2009). Optimal weakening and
damping using polynomial control for seismi-
cally excited nonlinear structures. Earthquake
Engineering and Engineering Vibration , 8 (4),
607-616. doi:10.1007/s11803-009-9124-2

Soong, T. T., & Dargush, G. (1997). Passive en-
ergy dissipation systems in structural engineering .
Chichester, UK: John Wiley & Sons. Cimellaro, G. P., Lavan, O., & Reinhorn, A. M.

(2009). Design of passive systems for controlled
inelastic structures. Earthquake Engineer-
ing & Structural Dynamics , 38 (6), 783-804.
doi:10.1002/eqe.867

Takewaki, I. (1997). Optimal damper
placement for minimum transfer function.
Earthquake Engineering & Structural Dy-
namics , 26 (11), 1113-1124. doi:10.1002/
(SICI)1096-9845(199711)26:11<1113::AID-
EQE696>3.0.CO;2-X