Geology Reference
In-Depth Information
Kim, H., & Adeli, H. (2005). Hybrid control of
irregular steel highrise building structures under
seismic excitations.
International Journal for Nu-
merical Methods in Engineering
,
63
, 1757-1774.
doi:10.1002/nme.1336
Liu, D. K., Yang, Y. L., & Li, Q. S. (2003).
Optimum positioning of actuators in tall build-
ings using genetic algorithm.
Computers &
Structures
,
81
(32), 2823-2827. doi:10.1016/j.
compstruc.2003.07.002
Kim, Y., Langari, R., & Hurlebaus, R. (2009).
Semiactive nonlinear control of a building
structure equipped with a magnetorheologi-
cal damper system.
Mechanical Systems and
Signal Processing
,
20
, 300-315. doi:10.1016/j.
ymssp.2008.06.006
Liu, X., Begg, D. W., & Matravers, D. R. (1997).
Optimal topology/actuator placement design of
structures using SA.
Journal of Aerospace Engi-
neering
,
10
, 119-125. doi:10.1061/(ASCE)0893-
1321(1997)10:3(119)
Moita, J. M., Correia, V. M., Martins, P. G., Soares,
C. M., & Soares, C. A. (2006). Optimal design
in vibration control of adaptive structures using
a simulated annealing algorithm.
Thirteenth In-
ternational Conference on Composite Structures
-
ICCS, 75
(1-4), 79-87.
Kim, Y., Langari, R., & Hurlebaus, R. (2010a).
Control of a seismically excited benchmark build-
ing using linear matrix inequality-based semiac-
tive nonlinear fuzzy control.
Journal of Structural
Engineering
,
136
(8), 1023-1026. doi:10.1061/
(ASCE)ST.1943-541X.0000192
Ohtori, Y., Christenson, R. E., Spencer, B. F. Jr, &
Dyke, S. J. (2004). Benchmark control problems
for seismically excited nonlinear buildings.
Jour-
nal of Engineering Mechanics
,
130
(4), 366-385.
doi:10.1061/(ASCE)0733-9399(2004)130:4(366)
Kim, Y., Langari, R., & Hurlebaus, R. (2010b).
Novel bio-inspired smart control for hazard mitiga-
tion of civil structures.
Smart Materials and Struc-
tures
,
19
. doi:10.1088/0964-1726/19/11/115009
Kobori, T., Koshika, N., Yamada, N., & Ikeda,
Y. (1991). Seismic response controlled structure
with active mass driver system. Part 1: Design.
Earthquake Engineering & Structural Dynamics
,
20
, 133-139. doi:10.1002/eqe.4290200204
Onoda, J., & Hanawa, Y. (1992). Actuator place-
ment optimization by genetic and improved
simulated annealing algorithms.
AIAA Journal
,
31
(6), 1167-1169. doi:10.2514/3.49057
Raich, A. M. (1999).
An evolutionary based meth-
odology for representing and evolving structural
design solutions
. Ph.D. dissertation, Department of
Civil and Environmental Engineering, University
of Illinois, Urbana-Champaign, IL.
Li, Q. S., Liu, D. K., Fang, J. Q., & Tam, C. M.
(2000). Multi-level optimal design of buildings
with active control under winds using genetic
algorithms.
Journal of Wind Engineering and In-
dustrial Aerodynamics
,
86
(1), 65-86. doi:10.1016/
S0167-6105(00)00004-0
Raich, A. M., & Ghaboussi, J. (1998). Evolving
structural design solution using an implicit re-
dundant genetic algorithm.
Structural Multidisci-
plinary Optimization
,
20
, 222-231. doi:10.1007/
s001580050150
Li, Q. S., Liu, D. K., Tang, J., Zhang. N., & Tam.
C. M. (2004). Combinatorial optimal design of
number and positions of actuators in actively con-
trolled structures using genetic algorithms. Journal
of Sound and Vibration,
270
(4-50), 611-624.
Search WWH ::
Custom Search