Multi-Objective Optimization Design of Control Devices to Suppress Tall Buildings Vibrations against Earthquake Excitations Using Fuzzy Logic and Genetic Algorithms - Design Optimization of Active and Passive Structural Control Systems - page 213

Deb, K., & Gupta, H. (2004). Introducing robust-
ness in multi-objective optimization. Technical
report (KanGAL report No. 2004016) . Kanpur,
India: Department of Mechanical Engineering,
Indian Institute of Technology.

Ji, H. R., Moon, Y. J., Kim, C. H., & Lee, I. W.
(2005, December). Structural vibration control us-
ing semiactive tuned mass damper. The Eighteenth
KKCNN Symposium on Civil Engineering-KAIST6
(pp. 18-20). Taiwan.

Fonesca, C. M., & Fleming, P. J. (1993). Genetic
algorithms for multi-objective optimization: For-
mulation, discussion and generalization. In S. For-
rest (Ed.), Proceedings of the Fifth International
Conference on Genetic Algorithms (pp. 416-423).
San Mateo, CA: Morgan Kaufmann.

Kamrani-Moghaddam, B., Rahimian, M., & Ghor-
bani-Tanha, A. K. (2006, October). Performance
of tuned mass dampers for response reduction of
structures under near-field and far-field seismic
excitations. Paper presented at the 4th International
Conference on Earthquake Engineering, No. 112,
Taipei, Taiwan.

Fukushima, I., Kobori, T., Sakamoto, M., Koshika,
N., Nishimura, I., & Sasaki, K. (1996, September).
Vibration control of a tall building using active-
passive composite tuned mass damper . Paper
presented at the Third International Conference on
Motion and Vibration Control, 1-6, Chiba, Japan.

Kelly, J. M. (1990). Base isolation: Linear theory
and design. Earthquake Spectra , 6 , 223-244.
doi:10.1193/1.1585566

Kim, Y. J., & Ghaboussi, J. (1999). A new
method of reduced order feedback control using
genetic algorithms. Earthquake Engineering &
Structural Dynamics , 28 , 193-212. doi:10.1002/
(SICI)1096-9845(199902)28:2<193::AID-
EQE811>3.0.CO;2-X

Hadi, M. N. S., & Arfiadi, Y. (1998). Opti-
mum design of absorber for MDOF struc-
tures. Journal of Structural Engineering ,
124 (11), 1272-1280. doi:10.1061/(ASCE)0733-
9445(1998)124:11(1272)

Knowles, J., & Corne, D. (1999). The Pareto
archived evolution strategy: A new base line
algorithm for multi-objective optimization. In
Proceedings of the 1999 Congress on Evolution-
ary Computation (pp. 98-105). Piscataway, NJ:
IEEE Service Center.

Hoang, N., Fujino, Y., & Warnitchai, P. (2008).
Optimal tuned mass damper for seismic applica-
tions and practical design formulas. Engineer-
ing Structures , 30 (3), 707-715. doi:10.1016/j.
engstruct.2007.05.007

Hwang, J. S., & Chiou, J. M. (1996). An equiva-
lent linear model of lead-rubber seismic isolation
bearings. Engineering Structures , 18 (7), 528-536.
doi:10.1016/0141-0296(95)00132-8

Komodromos, P. (2000). Seismic isolation for
earthquake resistant structures . Southampton,
UK: WIT Press.

Komodromos, P., Polycarpou, P., Papaloizou, L.,
& Phocas, M. C. (2007). Response of seismically
isolated buildings considering poundings. Earth-
quake Engineering & Structural Dynamics , 36 ,
1605-1622. doi:10.1002/eqe.692

Jangid, R. S., & Datta, T. K. (1995). Seismic
behavior of base isolated building: A state-of-
the-art-review. Structures and Buildings , 110 (2),
186-203. doi:10.1680/istbu.1995.27599

Jangid, R. S., & Kelly, J. M. (2000). Torsional dis-
placements in base-isolated buildings. Earthquake
Spectra , 16 , 443-454. doi:10.1193/1.1586120

Koo, J. H., Ahmadian, M., Setareh, M., & Mur-
ray, T. (2003). In search of suitable control meth-
ods for semi-active tuned vibration absorbers.
Journal of Vibration and Control , 10 , 163-174.
doi:10.1177/1077546304032020