Multi-Objective Optimization Design of Control Devices to Suppress Tall Buildings Vibrations against Earthquake Excitations Using Fuzzy Logic and Genetic Algorithms - Design Optimization of Active and Passive Structural Control Systems - page 210

Ioi, T., & Ikeda, K. (1978). On the dynamic
vibration damped absorber of the vibration sys-
tem. Bulletin of Japanese Society of Mechani-
cal Engineering , 21 (151), 64-71. doi:10.1299/
jsme1958.21.64

Lin, P. Y., Chung, L. L., & Loh, C. H. (2005).
Semiactive control of building structures with
semiactive tuned mass damper. Computer-Aided
Civil and Infrastructure Engineering , 20 , 35-51.
doi:10.1111/j.1467-8667.2005.00375.x

Jennige, R. L., & Frohrib, D. A. (1977). Alterna-
tive tuned absorbers for steady state vibration
control of tall structures. Journal of Mechanical
Design , 77 (84), 1-7.

Matsagar, V. A., & Jangid, R. S. (2003). Seis-
mic response of base-isolated structures during
impact with adjacent structures. Engineering
Structures , 25 , 1311-1323. doi:10.1016/S0141-
0296(03)00081-6

Kelly, J. M. (1986). Aseismic base isolation:
A review and bibliography. Soil Dynamics
and Earthquake Engineering , 5 , 202-216.
doi:10.1016/0267-7261(86)90006-0

Matsagar, V. A., & Jangid, R. S. (2004). Influence
of isolator characteristics on the response of base-
isolated structures. Engineering Structures , 26 ,
1735-1749. doi:10.1016/j.engstruct.2004.06.011

Kelly, J. M. (1996). Earthquake-resistant design
with rubber (2nd ed.). London, UK: Springer-
Verlag.

Mulligan, K. (2007). Experimental and analyti-
cal studies of semi-active and passive structural
control of buildings . PhD Thesis, University of
Canterbury, Christchurch, New Zealand.

Kelly, J. M., & Hasegawa, K. (1992). Application
of a mass damping system to bridge structures .
Report No. UCB/EERC 92/12. Berkeley, CA:
Earthquake Engineering Research Center.

Mulligan, K., Chase, J. G., Mander, J. B., Foug-
ere, M., Deam, B. L., Danton, G., & Elliot, R. B.
(2006). Hybrid experimental analysis of semi-
active rocking wall systems. Proceedings of the
New Zealand Society of Earthquake Engineering
Conference (NZSEE) , Napier, New Zealand.

Kelly, J. M., Skinner, R. I., & Heine, A. J. (1972).
Mechanisms of energy absorption in special de-
vices for use in earthquake resistant structures.
Bulletin of the New Zealand National Society for
Earthquake Engineering , 5 , 78-89. Mulligan, K., Miguelgorry, M., Novello, V., Chase,

J. G., Mander, J. B., & Rodgers, G. … Horn, B.
(2007). Semi-active tuned mass damper systems.
19 th Australasian Conference on Mechanics of
Structures and Materials (ACMSM), Christ-
church, New Zealand.

Kelly, J. M., & Tsztoo, D. F. (1977). Energy ab-
sorbing devices in structures under earthquake
loading. 6 th World Conference on Earthquake
Engineering , New Delhi, Vol. 2, (pp. 139-1374).

Kelly, T. E. (2001). Base isolation of structures:
Design guidelines . Holmes Consulting Group Ltd.

Naeim, F., & Kelly, J. M. (1999). Design of
seismic isolated structures, Earthquake resistant
design. Nabuto, J., Fujino, Y., & Ito, M. (1988). A
study of the effectiveness of TMD to suppress a
coupled flutter of bridge deck. Journal of JSCE,
October , 413-16.

Knowles, J., & Corne, D. (1999). The Pareto
archived evolution strategy: A new baseline
algorithm for multi-objective optimization. Pro-
ceedings of the 1999 Congress on Evolutionary
Computation, IEEE Service Center, Piscataway,
NJ, (pp. 98-105).

Ormondroyd, J., & Den Hartog, J. P. (1928). The
theory of the dynamic vibration absorber. Trans-
actions of the American Society of Mechanical
Engineers , 50 , 9-22.