Optimal Design of Nonlinear Viscous Dampers for Protection of Isolated Bridges - Structural Seismic Design Optimization and Earthquake Engineering - page 396

ADDITIONAL READING Taflanidis, A. A., & Jia, G. (2011). A simula-

tion-based framework for risk assessment and
probabilistic sensitivity analysis of base-isolated
structures. Earthquake Engineering & Structural
Dynamics , 40 (14). doi:10.1002/eqe.1113

Bahi, J. M., Contassot-Vinier, S., & Couturier,
R. (2008). Parallel iterative algorithms. From
sequential to grid computing . Boca Raton, FL:
Chapman & Hall/ CRC.

Taflanidis, A. A., Scruggs, J. T., & Beck, J. L.
(2008). Probabilistically robust nonlinear design
of control systems for base-isolated structures.
Journal of Structural Control and Health Monitor-
ing , 15 (3), 697-719. doi:10.1002/stc.275

Christopoulos, C., & Filiatrault, A. (2006).
Principles of passive supplemental damping and
seismic isolation . Pavia, Italy: IUSS Press.

Clough, R. W., & Penzien, J. (1993). Dynamics
of structures . New York, NY: Mc Graw-Hill Inc.

Takewaki, I. (2002). Seismic critical excitation
method for robust design: A review. Journal
of Structural Engineering , 128 (5), 665-672.
doi:10.1061/(ASCE)0733-9445(2002)128:5(665)

Cornell, C. A. (1968). Engineering seismic risk
analysis. Bulletin of the Seismological Society of
America , 58 (5), 1583-1606.

Tsopelas, P., Constantinou, M. C., Okamoto,
S., Fujii, S., & Ozaki, D. (1996). Experimental
study of bridge seismic sliding isolation sys-
tems. Engineering Structures , 18 (4), 301-310.
doi:10.1016/0141-0296(95)00147-6

Cox, R. T. (1961). Algebra or probable inference .
Baltimore, MD: The Johns Hopkins University
Press.

Elnashai, A., & Di Sarnio, L. (2008). Fundamen-
tals of earthquake engineering . West Sussex, UK:
John Wiley & Sons. doi:10.1002/9780470024867

Wang, Q., Fang, H., & Zou, X.-K. (2010). Ap-
plication of Micro-GA for optimal cost base
isolation design of bridges subject to transient
earthquake loads. Structural and Multidisci-
plinary Optimization , 41 , 765-777. doi:10.1007/
s00158-009-0470-5

Fujimoto, R. M. (2001). Parallel simulation:
Parallel and distributed simulation systems. Paper
presented at the 33rd Winter Simulation Confer-
ence, Arlington, Virginia.

Gavin, H. P., & Zaicenco, A. (2007). Performance
and reliability of semi-active equipment isolation.
Journal of Sound and Vibration , 306 (1-2), 74-90.
doi:10.1016/j.jsv.2007.05.039

Werner, G. (1960). Impact: The theory and physi-
cal behaviour of colliding solids . London, UK:
Edward Arnold.

Zerva, A. (2008). Spatial variation of seismic
ground motions modeling and engineering ap-
plications . Boca Raton, FL: CRC Press.

Gosavi, A. (2003). Simulation-based optimiza-
tion: Parametric optimization techniques and
reinforcement learning . Norwell, MA: Kluwer
Academic Publishers.

Zhang, J., Makris, N., & Delis, T. (2004).
Structural characterization of modern highway
overcrossings-Case study. Journal of Struc-
tural Engineering , 130 (6), 846-860. doi:10.1061/
(ASCE)0733-9445(2004)130:6(846)

Haukaas, T., & Der Kiureghian, A. (2007).
Methods and object-oriented software for FE re-
liability and sensitivity analysis with application
to a bridge structure. Journal of Computing in
Civil Engineering , 21 (3), 151-163. doi:10.1061/
(ASCE)0887-3801(2007)21:3(151)