Damage Assessment of Inelastic Structures under Simulated Critical Earthquakes - Structural Seismic Design Optimization and Earthquake Engineering - page 146

earthquake and the associated damage (Takewaki,
2002b, 2007, Saikat & Manohar, 2005, Fujita et
al, 2010).

Baker, J. W. (2011). Conditional mean spectrum:
Tool for ground motion selection. Journal of Struc-
tural Engineering , 137 (3), 322-331. doi:10.1061/
(ASCE)ST.1943-541X.0000215

Baker, J. W., & Cornell, C. A. (2006). Spectral
shape, epsilon and record selection. Earthquake
Engineering & Structural Dynamics , 35 , 1077-
1095. doi:10.1002/eqe.571

ACKNOWLEDGMENT

This research work is partly supported by research
funds from the Japanese Society for the Promotion
of Science (JSPS) under Grant No. JSPS-P-08073.
The support is gratefully acknowledged.

Baker, J. W., Lin, T., Shahi, S. K., & Jayaram, N.
(2011). New ground motion selection procedures
and selected motions for the PEER transporta-
tion research program . PEER Technical Report
2011/03. 106p. REFERENCES

Bommer, J. J., & Acevedo, A. B. (2004). The use of
real earthquake accelerograms as input to dynamic
analysis. Journal of Earthquake Engineering , 1 ,
43-91. doi:10.1080/13632460409350521

Abbas, A. M. (2006). Critical seismic load inputs
for simple inelastic structures. Journal of Sound
and Vibration , 296 , 949-967. doi:10.1016/j.
jsv.2006.03.021

Boore, D. M. (1983). Stochastic simulation of
high-frequency ground motions based on seis-
mological models of the radiated spectra. Bul-
letin of the Seismological Society of America , 73 ,
1865-1894.

Abbas, A. M., & Manohar, C. S. (2002). Inves-
tigations into critical earthquake load models
within deterministic and probabilistic frameworks.
Earthquake Engineering & Structural Dynamics ,
31 , 813-832. doi:10.1002/eqe.124

Bozorgenia, Y., & Bertero, V. V. (2003). Dam-
age spectra: Characteristics and applications to
seismic risk reduction. Journal of Structural
Engineering , 129 (4), 1330-1340. doi:10.1061/
(ASCE)0733-9445(2003)129:10(1330)

Abbas, A. M., & Manohar, C. S. (2005). Reliabil-
ity-based critical earthquake load models. Part 2:
Nonlinear structures. Journal of Sound and Vibra-
tion , 287 , 883-900. doi:10.1016/j.jsv.2004.12.003

Abbas, A. M., & Manohar, C. S. (2007).
Reliability-based vector nonstationary random
critical earthquake excitations for parametrically
excited systems. Structural Safety , 29 , 32-48.
doi:10.1016/j.strusafe.2005.11.003

Bozorgnia, Y., & Bertero, V. V. (Eds.). (2004).
Earthquake engineering . New York, NY: CRC
Press. doi:10.1201/9780203486245

Brune, J. N. (1970). Tectonic stress and the spectra
of seismic shear waves from earthquakes. Jour-
nal of Geophysical Research , 75 , 4997-5009.
doi:10.1029/JB075i026p04997

Akiyama, H. (1985). Earthquake-resistant limit-
state design for buildings . Tokyo, Japan: Univer-
sity of Tokyo Press.

Buratti, N., Stafford, P. J., & Bommer, J. J. (2011).
Earthquake accelerogram selection and scaling
procedures for estimating the distribution of drift
response. Journal of Structural Engineering ,
137 (3), 345-357. doi:10.1061/(ASCE)ST.1943-
541X.0000217

Arias, A. (1970). A measure of earthquake inten-
sity: Seismic design of nuclear power plants (pp.
438-468). Cambridge, MA: MIT Press.

Arora, J. S. (2004). Introduction to optimum de-
sign . San Diego, CA: Elsevier Academic Press.