Digital Signal Processing Reference
In-Depth Information
The connector uses a BNC socket with an impedance of 75 Ohms. The
level is 800 mV PP (+/-10%).
The TS ASI interface can be operated in two modes: Burst mode, in
which the TS packets remain unchanged in themselves and dummy pack-
ets are inserted to attain the data rate of 270 Mbit/s, and single byte mode,
in which dummy bytes are inserted to provide “stuffing” to the output data
rate of 270 Mbit/s.
10bit
10bit
10bit
K28.5
K28.5
K28.5
TSB
TSB
TSB
K28.5
K28.5
K28.5
K28.5
K28.5
K28.5
K28.5
K28.5
K28.5
TSB
TSB
TSB
K28.5
K28.5
K28.5
188 * 10 bit
188 * 10 bit
188 * 10 bit
n * K28.5
n * K28.5
n * K28.5
TSP (188 * 8 Bit)
TSP (188 * 8 Bit)
TSP (188 * 8 Bit)
n * K28.5
n * K28.5
n * K28.5
Special character K28.5
0011111010
1100000101
TSB = Transport stream byte
TSP = Transport stream packet
Special character K28.5
0011111010
1100000101
TSB = Transport stream byte
TSP = Transport stream packet
Fig. 10.7. TS-ASI in Single-Byte Mode (top) and in Burst Mode (bottom)
Bibliography: [GRUNWALD], [DVG], DVMD], [DVQ], [FISCHER4],
[ITU601], [REIMERS], [TAYLOR], [MPEG4]
Search WWH ::




Custom Search