XBees - Arduino - page 101

Table 5-2.

Frame Name Frame Type Description Frame Data

0x88 Notification of AT command

status and data contained
within the register when read.

AT command
response

Frame ID: 1 byte
AT command: 2 bytes
Command status: 1 byte
Register data: Variable

0x97 Same function as AT command

response for a remote module.

Remote command
response

Frame ID: 1 byte
Source address: 8 bytes
Source network address: 2 bytes
AT command: 2 bytes
Command status: 1 byte
Register data: Variable

0x8B Transmit status The acknowledgment packet of

data transmission.

Frame ID: 1 byte
Destination network address: 2 bytes
Number of retries 1 byte
Delivery status: 1 byte
Discovery status: 1 byte

0x90

Receive packet The transformation of the

transmit request when received.

Source address: 8 bytes
Source network address: 2 bytes
Options: 1 byte
Data payload: Variable

Explicit Rx indicator 0x91

The transformation of route
transmit request.

Source address: 8 bytes
Source network address: 2 bytes
Source endpoint: 1 byte
Destination endpoint: 1 byte
Cluster ID: 2 bytes
Profile ID: 2 bytes
Options: 1 byte
Data payload: Variable

0x92 IO sample indicator The packet used to signify I/O

activity revived when
configured to do such.

Source address: 8 bytes
Source network address: 2 bytes
Options: 1 byte
Number of samples: 1 byte
Digital channel mask: 1 byte
Analog channel mask: 1 byte
Digital sample sets: 2-byte variable sets
Analog sample sets: 2-byte variable sets

0x94 Sensor read

indicator

Packet received from Digi
1-wire adapter.

Source address: 8 bytes
Source network address: 2 bytes
Options: 1 byte
1-wire sensor: 1 byte
A/D values: 8 bytes
Temperature read: 1 byte

( continued )