Hardware Reference
In-Depth Information
3.
Click Enable TCP/IP Protocol Suite.
4.
Click the Interfaces icon. You should see that USB Ethernet over USB is selected.
5.
Click the Configure button next to this and you can now configure your IP settings.
In Figure
11-10
you can see I am using DHCP for the network settings.
Figure 11-10.
The IP configuration window and the Interfaces window
6.
Once you have configured your network settings, click the Set button and close each of the
windows.
7.
Once they are all closed the RISC OS system will ask you if it can reboot to enable the
changes. It's best to restart the system now.
Once your system has restarted you can test out the Internet access. Click the !NetSurf icon on the desktop. Hang
on: where is your browser? Why did nothing appear onscreen? In RISC OS when you first open an application it will
be placed into the application tray on the bottom right-hand corner of the screen. From there you can do something
with the application. See Figure
11-11
to see the NetSurf application loaded into the application tray.
Figure 11-11.
The application tray with NetSurf loaded
