Hardware Reference
In-Depth Information
checking MD5 sum...
target/KERNEL: OK
target/SYSTEM: OK
umount: /dev/sde: not mounted
writing new disklabel on /dev/sde (removing all partitions)...
creating partitions on /dev/sde...
marking partition active...
telling kernel we have a new partition table...
creating filesystem on /dev/sde1...
mkfs.vfat 3.0.13 (30 Jun 2012)
creating filesystem on /dev/sde2...
mke2fs 1.42 (29-Nov-2011)
Filesystem label=Storage
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
476720 inodes, 1904128 blocks
95206 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1950351360
59 block groups
32768 blocks per group, 32768 fragments per group
8080 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
mounting partition /dev/sde1 ...
creating bootloader configuration...
copying files to /dev/shm/openelec_install...
syncing disk...
unmounting partition /dev/shm/openelec_install ...
cleaning tempdir...
...installation finished
You may not need to edit the script or inhibit
udisks
on your system. I needed to and I have listed what had
to be done in case you encounter the same issues. After all, the script should just work. Now you have an SD card
loaded with OpenELEC. Do take note that the second partition is empty, and this is correct. The root filesystem is in
a
squashfs
container on the first partition. The
squashfs
filesystem is called SYSTEM. Now that you have an SD card
ready you want to add the MPEG-2 and VC-1 licenses to the SD card you just made.
Decode Licenses
Getting the licenses is simple for the end user. On the Raspberry Pi Foundation's side, it is still a manual process
to generate the keys; someone at the foundation still needs to generate the keys by hand and then e-mail them to
you. This step is completely optional: OpenELEC does not need the MPEG-2 and VC-1 keys to run at all. The two
licenses in question enable hardware decoding for the MPEG-2 and VC-1 codecs. This will be a massive performance
