Information Technology Reference
In-Depth Information
Task 6: Verify the Configurations
Answer the following questions to verify that the network is operating as expected.
From the host attached to R1, is it possible to ping the default gateway? Yes
From the host attached to R2, is it possible to ping the default gateway? Yes
From router R1, is it possible to ping the Serial 0/0/0 interface of R2? Yes
From router R2, is it possible to ping the Serial 0/0/0 interface of R1? Yes
The answer to the above questions should be yes . If any of the above pings failed, check your physical
connections and configurations. If necessary, refer to “Lab 1-2: Basic Router Configuration (1.5.2).”
What is the status of the FastEthernet 0/0 interface of R1? up and up
What is the status of the Serial 0/0/0 interface of R1? up and up
What is the status of the FastEthernet 0/0 interface of R2? up and up
What is the status of the Serial 0/0/0 interface of R2? up and up
What routes are present in the routing table of R1?
C 192.168.1.64 is directly connected, Serial0/1/0
C 192.168.1.32 is directly connected, FastEthernet0/0
What routes are present in the routing table of R2?
C 192.168.1.96 is directly connected, FastEthernet0/0
C 192.168.1.64 is directly connected, Serial0/0/0
Task 7: Reflection
Are there any devices on the network that cannot ping each other?
R1 cannot ping the Fast Ethernet interface on R2. R2 cannot ping the Fast Ethernet interface on R1.
PC1 cannot ping PC2. PC2 cannot ping PC1.
What is missing from the network that is preventing communication between these devices?
After reading the chapter text, the student should be able to state that this network is missing either
static or dynamic routing (or both!).
Task 8: Document the Router Configurations
On each router, capture the following command output to a text (.txt) file and save for future reference:
Running configuration
Routing table
Summary of status information for each interface
Search WWH ::




Custom Search